HU162 10-4-4 lishi decode help

[AndyCZ]

Has anyone decoded lishi Audi/VW lock HU162? I decoded like 60/30/30/30 - side cuts and 323533 - conventional cuts.
Decoded in appl like this. But key not work.Tried mirror cuts - no luck. I bought about 5 HU162 locks on ebay for training purposes.
Cutted about 10 blades different version. Has anyone ever succeed with this lock?

[Jimalex]

I dont have hu162t lishi but check hu162 sided bitting calculate.
I think you must read side cut before opening and after open the lock.

[u.s]

do the 0,30,60,90 equate to 1,2,3,4 ?
if so then should the side cuts be 3222 and not 2111 ?

try cutting as 3222323533

[AndyCZ]

do the 0,30,60,90 equate to 1,2,3,4 ?
if so then should the side cuts be 3222 and not 2111 ?

try cutting as 3222323533

I see the first four cuts are OK but not opening. I think the side cuts are different. How did you find the first 4 picks?

[AndyCZ]

the correct bitting is 3222343133 but the key only lock, not unlock.

[u.s]

have you tried the following:
A axis: 3222343133
B axis: 3222
C axis: 2333

or

A axis: 3323343133
B axis: 3222
C axis: 2333

[u.s]

EDIT: double post

[AndyCZ]

have you tried the following:
A axis: 3222343133
B axis: 3222
C axis: 2333

yes, one side close but not open. The other side not work.
The second code either will not work. There first four wafers aren't in the door lock. These were meant for ignition.
This was the door lock for audi A4.

I used the same logics for:
A8 door lock - not work
Touran 5T - not work
Tiguan Allspace - not work
Passat B8 - not work

[g5n14]

Very good topic! Keep it updated. From which year they started doing this side bitting stuff?

[gttuning]

Passat is from 2015 up i think..

Sent from my SM-G955F using Tapatalk

[Oktawian]

Open the lock and check wafers ...

[Bllinda]

Lock ....

P.S. Pws in PM

[rob h]

The locks, that you bought,
They came with fitting Keys?

Start compare the readings from lishi, to a working key.

My guess, lishi 4 cuts, are mirrored, or you Read Them bad.
0=never 0, IT should display , -10 OR +15.
4 a 80, 90 OR 100.
Read of, ones with no pressure, ones with medium, once with fair pressure,
Right these down, in 3x4 collom



And about the key, that Will lock, not unlock.
Assuming youre cuts are of the correct cutting height?
Using a 1.5mm, and measuring the key After cutting with caliper.

Or like they said, take one apart, work your way back.

[AndyCZ]

The locks, that you bought,
They came with fitting Keys?

Start compare the readings from lishi, to a working key.

My guess, lishi 4 cuts, are mirrored, or you Read Them bad.
0=never 0, IT should display , -10 OR +15.
4 a 80, 90 OR 100.
Read of, ones with no pressure, ones with medium, once with fair pressure,
Right these down, in 3x4 collom



And about the key, that Will lock, not unlock.
Assuming youre cuts are of the correct cutting height?
Using a 1.5mm, and measuring the key After cutting with caliper.

Or like they said, take one apart, work your way back.

I have no keys to locks. The picks are correct, these almost new original locks. Cutter is 1.5mm, either machine would not cut.
I cut about 20+ pcs different versions inc. mirror - not work.
Once I have time I disassemble one lock to look.

[Bllinda]

Take a few pictures of the disassembled locks.