Better buy cable not expensive and made in UK.
Hi mates. I try to program remote in rover 25, SCU 5AS system, i have t300+, but i can't comunicate with 5AS unit.
I see there is a cable for Rover to comunicate with 5AS or MEMS (ecu). Any have pinout to do this cable? I can comunicate with MEMS throug pin 2 of T300 to pin 7 (K-line), but i can't comunicate with SCU unit.
Thanks in advance.
Better buy cable not expensive and made in UK.
What year of that Rover 25?
ruffles1986 (3rd July, 2020)
Yes i saw also, but take some days to arrive
From 2000 year
First time I hear about such cable. If car have OBD2 socket then SBB should do it - I never failed.
ruffles1986 (14th July, 2020)
Cable has been around for several years
A company called techtronics in UK made them and there is a big write up on this forum plus Internet about it never used sbb myself but if works as you said cheap tool to use.
I try with t300+ and diagram for rover and doesn't work, i thinks is problem of the crap of machine, i buy only for this car and dont work.... Theres is a way to read code of remote? then maybe i can add to 5as module directly as Pektron system
Hmmmm very old 3 pin cable existed.
Also i heard odd ground missing on OBD connector.
But i think i know what u mean.,,,
Separate rx n tx Comms on OBD pin 1 and 3 from memory and indeed separate OBD lead also exists. Recall writing software for it
I have it - but sadly my original AD100 burned years ago and these clones aren't the same.
PS. Don't rule out issue with car as most down scrap yard
p1et (14th July, 2020)
I told you
That's why I completely do not understand idea of that 'special' cable...
Bookmarks