CLIO IV PROBLEM WITH CONFIGURE USED ABS MODULE

[Gold1234]

Hello my friend.
i have problem with change abs module in clio iv.
abs is bosch with esp, inside is eeprom 95128 and tms570.
i have problem bcz when i replace module still i have fault about configuration i can not change this.
any one can help? What tool or dump to eeprom?
i copy eeprom but not succes.

[Catalizator]

use dd4all to change the config. or canclip can do this if you have one.

[Gold1234]

So i try with ddt4all but can not change gearbox. I have airbag probably from manula bit in car is automatgearbox. I have clip but in abs can not change config only reprog. I damage one abs when i make reprog....
maybye another solution?

[Catalizator]

So i try with ddt4all but can not change gearbox. I have airbag probably from manula bit in car is automatgearbox. I have clip but in abs can not change config only reprog. I damage one abs when i make reprog....
maybye another solution?

what odb adapter do you use to work with dd4all?

[Gold1234]

Red obdlink

[Gold1234]

Red obdlink

Or maybye i have fault ddt4all.
you are chanhe configuration in renault abs ?

[Catalizator]

I think you need to do reset soft. and configure canclip. This is an extreme option.

[Kanni2004]

I was in the same situation as you, i destroy one abs on one clio IV.

I try other abs module and try to update with my old eeprom data but never working without error code.

at least i buy used part on ebay with the same option as my and less KM and it's working.

Try to not buy used ABS MODULE from RHD car.

I try to reprog with CLIP but my shity clone crash during reprog.