Reply With QuoteAfter full clon mcu flash/eep just start car and that's it!
Results 1 to 4 of 4
-
8th July, 2020, 11:25 PM #1DK Veteran
- Join Date
- May 2017
- Location
- Poland
- Posts
- 491
- Thanks
- 105
- Thanks
- 67
- Thanked in
- 60 Posts
Land Rover Discovery 2 BCU Valeo 73000012/A how to clone
Hi
I need to clone BCU Valeo 73000012/A from Land Rover Discovery 2. Original BCU is: 73000012/A YWC 106350 A0010 330/98 H:A S: 7.01. Second (used) BCU is: 73000012/A YWC 106350 A0010 158/99 H:A S:7.01. Inside BCU"s are Motorola with 0G10V mask (with 84 legs). Do I need to read ori Motorola and write to second used motorola? or if I will desolder motorola from ori BCU and will solder it to second (used) BCU car will start? or after swaping Motorola I will need to adopt BCu to the car?
Best regards
-
9th July, 2020, 07:49 AM #2DK Veteran
- Join Date
- Oct 2015
- Location
- Same where
- Posts
- 10,914
- Thanks
- 3,993
- Thanks
- 6,307
- Thanked in
- 4,618 Posts
NB!!! Don't ask in PM old file password , Im not remember.
-
10th July, 2020, 09:32 AM #3Member
- Join Date
- Jun 2017
- Posts
- 79
- Thanks
- 18
- Thanks
- 21
- Thanked in
- 17 Posts
As Brend said, but I would recommend to switch of immo in engine ECU (93C46 @ MSB... or 93C66 @ NNN...)
-
10th July, 2020, 02:26 PM #4DK Veteran
- Join Date
- May 2017
- Location
- Poland
- Posts
- 491
- Thanks
- 105
- Thanks
- 67
- Thanked in
- 60 Posts
ok thanks - will report after processor swaped
Bookmarks