Check this and report ...
Check this and report ...
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
nezocas (11th July, 2020)
Hi,
It didnt worked.
Custumer told me that he only had the B1100 error.
I have returned ECU to him, and he told me that the error is still the same B1100..... He didnt told me that when he delivered the ECU to me initially, the ECU had one other error (side passenger airbag) Not sure the error number.
He tested all cabling from passenger airbag to the ECU and all fine, he even tried a resistor directtly in the ECU plug, but the passenger airbag error never deleted.
X-Prog 5.60 / Upa-Usb 1.3 / CarProg 4.74 and 7.28 / MiniPro / Galletto 4 VD300 / Digiprog 3 / SVCI 2018 / Autel MP808 / Autocom 2020.23 / USBDM / Skyprog / RT809H / R270+
Check elements on pcb ...
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
nezocas (11th July, 2020)
Bookmarks