Register
Results 1 to 8 of 8
  1. #1
    DK Veteran
    sdnatlst's Avatar
    Join Date
    Aug 2011
    Location
    England
    Posts
    1,083
    Thanks Thanks Given 
    425
    Thanks Thanks Received 
    150
    Thanked in
    107 Posts

    Default opcom corsa 1.3 2011 ECU

    will opcom program 1.3 diesel ECU into the car OK?

    I have pin code from DONOR ECU

    and will pull pin from the cluster on the car.


    So virginise new ECU with NEW ECU pin with opcom

    Then program new ECU with cars original PIN with opcom

    Anything further that will need coding/syncing?
    Tools owned -
    AD100 PRO, Lonsdor, FVDI 18, FVDI 20, VVDI PROG, VVDI2, VVDI MB
    CGDI BMW, SuperVag, Renault ECU tool, OBDstar X300 DP Plus, AUTEL im508
    VVDI Mini Keytool, KeyDIY KDX2, SBB, ACDP CAS/KVM
    Opcom, VCDS pro, Diagbox, Multiecuscan, Forscan, JLR SDD

  2. #2
    DK Veteran

    Join Date
    Jun 2010
    Posts
    321
    Thanks Thanks Given 
    57
    Thanks Thanks Received 
    81
    Thanked in
    74 Posts

    Default

    check ecu coding. transmision abs type of airco clutch or valve

  3. The Following User Says Thank You to yokazik For This Useful Post:

    sdnatlst (14th July, 2020)

  4. #3
    DK Veteran
    wembleyhill's Avatar
    Join Date
    Feb 2009
    Posts
    968
    Thanks Thanks Given 
    41
    Thanks Thanks Received 
    765
    Thanked in
    542 Posts

    Default

    hi as long as you have pin for car and donor shoud be no problem i done before
    use buttons

  5. The Following User Says Thank You to wembleyhill For This Useful Post:

    sdnatlst (14th July, 2020)

  6. #4
    DK Veteran
    sdnatlst's Avatar
    Join Date
    Aug 2011
    Location
    England
    Posts
    1,083
    Thanks Thanks Given 
    425
    Thanks Thanks Received 
    150
    Thanked in
    107 Posts

    Default

    Quote Originally Posted by yokazik View Post
    check ecu coding. transmision abs type of airco clutch or valve

    it is matching HW and SW number ECU, hope it should be a match?
    Tools owned -
    AD100 PRO, Lonsdor, FVDI 18, FVDI 20, VVDI PROG, VVDI2, VVDI MB
    CGDI BMW, SuperVag, Renault ECU tool, OBDstar X300 DP Plus, AUTEL im508
    VVDI Mini Keytool, KeyDIY KDX2, SBB, ACDP CAS/KVM
    Opcom, VCDS pro, Diagbox, Multiecuscan, Forscan, JLR SDD

  7. #5
    Member

    Join Date
    Jan 2018
    Location
    Portugal
    Posts
    43
    Thanks Thanks Given 
    4
    Thanks Thanks Received 
    13
    Thanked in
    11 Posts

    Default

    Hi,
    That ecu must be compatible hw and sw.

    Enviado do meu Mi Note 10 Pro através do Tapatalk

  8. The Following User Says Thank You to Remaptech For This Useful Post:

    sdnatlst (14th July, 2020)

  9. #6
    DK Veteran

    Join Date
    Mar 2019
    Location
    Earth
    Posts
    612
    Thanks Thanks Given 
    146
    Thanks Thanks Received 
    280
    Thanked in
    95 Posts

    Default

    Yes it will program it .Make sure to config Low Speed ,Mid speed and High speed can configuration reset old ecu instal new ecu reset it than program it with car s pin code.5 min job

  10. #7
    DK Veteran
    PierreTheron's Avatar
    Join Date
    Aug 2009
    Location
    Centurion,South Africa
    Posts
    2,142
    Thanks Thanks Given 
    1,042
    Thanks Thanks Received 
    642
    Thanked in
    307 Posts

    Default

    might need rest cluster and program again .
    Reset bcm and program again
    You will see the fault codes related to it in the ecu
    Best Regards

  11. #8
    DK Veteran
    sdnatlst's Avatar
    Join Date
    Aug 2011
    Location
    England
    Posts
    1,083
    Thanks Thanks Given 
    425
    Thanks Thanks Received 
    150
    Thanked in
    107 Posts

    Default

    thanks, opcom didnt have any option to program ECU on this year but i cloned it on the bench and it worked fine
    Tools owned -
    AD100 PRO, Lonsdor, FVDI 18, FVDI 20, VVDI PROG, VVDI2, VVDI MB
    CGDI BMW, SuperVag, Renault ECU tool, OBDstar X300 DP Plus, AUTEL im508
    VVDI Mini Keytool, KeyDIY KDX2, SBB, ACDP CAS/KVM
    Opcom, VCDS pro, Diagbox, Multiecuscan, Forscan, JLR SDD

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.