Ford S-Max Delphi DCM 3.5 wiring

[veskobx]

Hi m8s, can anyone share a wiring diagram of Delphi DCM 3.5 Ford S-Max 2011y with keyless start/stop.
Car cant start, and ecu wakes up every one minute.

[thorino]

if you take off rf module from the car is ECUs behavior the same?

[veskobx]

I will try if i find this rf module.
There is one wire coming out from BCM to ECU, this wire level is high for a few seconds per minute, and wakes up ECU in strange behaviour, all electrical valves an preheating relay clicks two times per cecond. if i turn ignition ON, this behaviour is permanent

[atd]

I'm unfornately not having wiring diagram by me now but you have to check relays in engine bay and wiring exactly from this box to ecu. I'm sure that you will find there the problem. I know that seems to be very long work but no, two hours and car runs. Ah... also clean grounds...they often are poor.