BMSKP read.

[jviana]

My bike BMSKP 8 521 661 went damaged and I would need to reprogaram my original data in a used replacement unit.
The point is that I have too much basic doubts:
My Controller is a SC667037. Is this the same than MCP564?
MCP 564 has built in 512K Flash, is it used additionally to external M58BW0160DB 16Mb Flash (2097152 Bytes)?
MPC 56x external Flash is mapped starting at 0x080000, I see in several threads VIN at 0x060000 and Keys at 0x060017. These addresses belong to MPC563/4 internal 512K Flash not the external

M58BW0160DB

.
Is there a way to read this MPC564 512K internal Flash to program original data into the replacement BMSKP ECU unit?
Many thanks,
Jose

[jviana]

Or... is the 0x000000 Address in the dumps from the external Flash M58BW0160DB and

512K internal Flash from MCP564 just not used?
Thanx!

MPC564_mem.jpg