a very common problem in Vito w447 / 2016
No backlights working behind the middle LCD
LCD work 100% and all other function work perfect
Someone has repair info ?
Thx
a very common problem in Vito w447 / 2016
No backlights working behind the middle LCD
LCD work 100% and all other function work perfect
Someone has repair info ?
Thx
I have one, just like this.
Did you, or anyone figure out how to fix this?
Dash still works, just very dimmed.
Changing lcd, does not help.
Plug in other cluster, that is fine.
For now, we will exchange cluster.
I also found this on dk.
https://www.digital-kaos.co.uk/forum...highlight=w447
Last edited by rob h; 30th July, 2020 at 06:36 PM.
rob h (30th July, 2020)
Then i will swapp the hole cluster.
Thank you!
hi have same problem on 447 dash i know there is a fix out there anyone willing to share which component is to be changed,
no filter on this one its common problem..
Is this a Johnson control flaw.
Are the vdo cluster better?
measure.............
Last edited by salkapone; 12th September, 2020 at 12:38 AM.
Recovery Service ,File Service [COLOR=#00ff00][FONT=system]VAG ,PSA,Renault ,FIat IMMO solutions!!BMW solutions!! Volvo solutions!! Audi BCM2 repair ,key programing .module matching !!MB solutions !!! CAS / FEM / BDC Recovery !! Poldiag Keymaster seller
Hello,
I have the same problem on my W447. Does anybody can tell me what to change please?
Regards
I have the same problem on W447 instrument cluster, display work but no backlight. I am contact minitools.com and they told me that problem is on main board. Anyone know where is problem ? I need to repair myself. I can not send it to outside country.
Thank you
credoline (17th August, 2021)
I had a similar error, I had ripped a small capacitor and its trace in top right corner of cluster (from back), repaired trace and checked continuity, all worked fine afterwards.
AchtungPress the magic button
I have the same problem. Anyone know the solution?
Hello ! I have same dash with same problem, bought new LCD but still no back light, but graphic and all working OK. Mine cluster dont have CAN filters or any of that. I've also heard about BCP53 replacement and component in surrounding , but nothing. Now Im re soldering all bigger resistors. Does anyone have solution, I have dash on my bench for testing.
Best regards
Alex L
Last edited by Alex79; 9th October, 2021 at 11:25 AM.
Bookmarks