Well what is the code for srs? Have you saved original file? Try putting original file back.
Try the easy things first, and backtrack what you did. Not so hard.
Any ideas on why the SRS malfunction has come on after doing a mile job? Everything else is good. Took battery off and cleaned with launch scan tool, but srs still comes back. Maybe a higher grade scanner can clear it, or something with the coding? Used sf tool, usually no problems for this car. Thanks.
Sent from my iPhone using Tapatalk
Well what is the code for srs? Have you saved original file? Try putting original file back.
Try the easy things first, and backtrack what you did. Not so hard.
MileageAudit5 (4th August, 2020)
Did you put the car on ignition without the dashboard installed?
If i helped you with your problem, please press the Thanks button.
Ask your questions in the forum, no response on private messages.
MileageAudit5 (4th August, 2020)
I do have the original file saved. That is an option. According to my scanner the 2 airbag codes that are not clearing are B1650 “Occupant classification system malfunction” and B1794 “Occupant classification ECU battery positive line open” thoughts? I’ll probably end up writing original file back but hopefully I can avoid that option.
Sent from my iPhone using Tapatalk
Check fuse for OPDS and calibrate passenger seat.
MileageAudit5 (6th August, 2020)
Checked fuses, all are good. Wrote original file back to the car and same srs codes are still there. Tried clearing with snap on scanner and codes turn off then come right back. Is calibrating passenger seat still a potential solution? Not sure how to do this but I’ll look around.
Would resetting the srs module do anything since no accidents have occurred?
Sent from my iPhone using Tapatalk
Yes, go to opds menu, should be seperate from srs menu. If you have no communication, start checking wires.
MileageAudit5 (6th August, 2020)
you need to calibrate passenger seat.
miles job, did not cause this problem..
DON'T JUST SAY PRESS IT.....
Bookmarks