Ford Transit 2005 central locking

[handyman]

Hi, my central locking just stop workink on my 2005 transit for no reason i tried the fuse but ok, and i have put in a new battery in the remote control no joy,can someone help please as to what is wrong with it,

[cristec]

Hi it might be worth trying to re-syncronise the remote control first.
Sit in van and shut all doors.
Turn the ignition on and off 8 times within 10 seconds, leaving the ignition on the last time, the programming mode will be entered and the doors should lock and then unlock.
Then within 20 seconds press any button on the remote control, if OK the doors will lock and then unlock.
To exit the programming mode turn ignition off.

HTH

[Meat-Head]

Hi it might be worth trying to re-syncronise the remote control first.
Sit in van and shut all doors.
Turn the ignition on and off 8 times within 10 seconds, leaving the ignition on the last time, the programming mode will be entered and the doors should lock and then unlock.
Then within 20 seconds press any button on the remote control, if OK the doors will lock and then unlock.
To exit the programming mode turn ignition off.

HTH

If that don't work, repeat experiment with door open, foot on brake(it' free), and toggle the ignition six times or until the locking goes CLUNCK.

If that don't work then something is wrong.


Say Original (if i'm your clone!) Did you find the above by accident one day as well?

[cristec]

Hi mini me,
No I have a Transit Connect, and when I bought it I only had 1 remote, bought 1 from ebay and then had to find out how to sync with van.

[Meat-Head]

Hi mini me,
No I have a Transit Connect, and when I bought it I only had 1 remote, bought 1 from ebay and then had to find out how to sync with van.

Well just reminding you, when you fit an after aftermrket alarm to it and it mentions about CDL locking, you have to ram a bit of wire in the locataion stated, (like bmw 3 series). But bet you knew that already.

[cristec]

No sorry you lost me this time.

[Meat-Head]

No sorry you lost me this time.

If you are fitting an after market security system, that locks and unlocks the doors, the spec sheet says something like "unlock pin 10" but what they don't tell you is you have to ram a piece of wire in the position number 10, no wire to connect to!

[cristec]

Hi I haven't fitted alarms for ages now, so have never fitted one to a Connect.

[Meat-Head]

Hi I haven't fitted alarms for ages now, so have never fitted one to a Connect.

it would have to be in advance, but if you want a tech sheet, anytime just ask.

Surpised you havent tried hacking various websites.

www.lazerline-direct.com is good, but log in detals relate to M-H-M account number!