pm my if you needed good solution
pm my if you needed good solution
maybe hacker boujad should read the rules because all of his 11 posts break the rules, even 1 of them stating "its not free"
2WD Dyno , Magpro2 X17, FLEX Master , KESS Master , AUTOTUNER Master, Byteshooter Master, EVC Winols Reseller
Official Magicmotorsport DistributorCode:FILESERVICE: Tuning / DPF / EGR / Adblue / DTC / Immo
Official Autotuner Distributor
Official Alientech Distributor
cd_contact (27th August, 2020), hackerboujad (27th August, 2020)
please file pass prive
cd_contact (27th August, 2020)
No , Paypal for pass .
cd_contact (27th August, 2020), pedro222 (31st August, 2020)
Sorry to revive this old thread ... but the problem is still not solved .
Anyone ?
PS : I would like to thank Jurebv for assisting with my issues
I received a file from jurebv , he was very helpfull . But the status in measuring block 70 still stays at 0000 0001 - normal thermal regeneration . And the car has a brief moment when the glow plug indicator and check engine flash , and it goes into some sort of limp mode until restart . No fault codes .
It's like the ECU resets itself during driving . Suspected hardware fault , replaced with original file and everything is ok (except dpf faults )
Your dpf off file
cd_contact (31st October, 2020)
cd_contact (31st October, 2020)
cd_contact
Hello everyone, I see what's going on here, here's how I want to help, of course, for free with the real worked dpf off solution guy cd_contact, but ori flash that you know is not good and you didn't read it well, I don't know what and with what tool you do it. normal ori flash to help you. That's why I say that noje is a good file that you put on the forum because I checked and it's not good, if you haven't solved it yet and made tdpf off please let me drive read it again well ori flash file and post it on the forum.Have a nice day everyone
cd_contact (31st October, 2020)
Bookmarks