Peugeot 206 K-line Remote not programming

[lmqcatarino]

Customer just have 1 transponder key.
Try to program a remote to a Peugeot 206, but don't succed.
Program transponder, but remote don't work.
Without fog lights, trying to program a 6554YL remote. (Already try KD and Original).

Could read BSI without DTC

BSI Identification

Functional Plan No: 9649627880
Manufacturer: Siemens
Functional Product: 9649627880
Software Index: 04.00
Serial Number: FFFFFF
Manufacturing Date: 255/255/2255
System: B1
Software edition: 34.11
Software signature: 93.37
Software reference: 9656355580
Programming Date: 31/1/2005
Reprogramming counter: 2
VIN: VF32AHEXF42856650
Engine type: TUIJP (1.1 i)

Check fuses, and all OK.

There is a receiver or antenna to check?
Or what to check now?
Thanks in advance.

[rob h]

The transponder and remote pcb are matched.
Programming the transponder, will allow the remote to work.

If you swap the trasnponder, the remote wont work.
I read somewhere on D.K. that a used transponder can be reporgrammed.

And you can always created a remotekey, using keydiy or Xhorse

[RIMKACHIP]

Pcf7936 is paired with remote Green card. If you have new pcf7936 and you want to match original remote or remote of another 206 it’s not possible. If you want remote work you must add new original key (pcf7936 Virgin with remote card of this Virgin pcf7936) or new chinese key pcf7961 with antenna on remote and not have pcf7936 on key.


Envoyé de mon iPhone en utilisant Tapatalk

[szengen]

The transponder and remote pcb are matched.
Programming the transponder, will allow the remote to work.

If you swap the trasnponder, the remote wont work.
I read somewhere on D.K. that a used transponder can be reporgrammed.

And you can always created a remotekey, using keydiy or Xhorse

.....ok206.rar

https://www.youtube.com/watch?v=GceZ9uyOQSM

[szengen]

from the red lights in the city to the next lights in the city I don't see a faster car

[lmqcatarino]

I know that.
I didn't swapped anything.
Remote was virgin.
The problem must be in the car. I just don't know what to look or test.

[RIMKACHIP]

I know that.
I didn't swapped anything.
Remote was virgin.
The problem must be in the car. I just don't know what to look or test.

What is your Virgin key ? Chinese or original with 7936 ?


Envoyé de mon iPhone en utilisant Tapatalk

[swingman26]

Customer just have 1 transponder key.
Try to program a remote to a Peugeot 206, but don't succed.
Program transponder, but remote don't work.
Without fog lights, trying to program a 6554YL remote. (Already try KD and Original).

Could read BSI without DTC


BSI Identification

Functional Plan No: 9649627880
Manufacturer: Siemens
Functional Product: 9649627880
Software Index: 04.00
Serial Number: FFFFFF
Manufacturing Date: 255/255/2255
System: B1
Software edition: 34.11
Software signature: 93.37
Software reference: 9656355580
Programming Date: 31/1/2005
Reprogramming counter: 2
VIN: VF32AHEXF42856650
Engine type: TUIJP (1.1 i)

Check fuses, and all OK.

There is a receiver or antenna to check?
Or what to check now?
Thanks in advance.

On this car with chinese remote, you must use pp2000 and enter to bsi and change configuration on RF receiver. Put new RF receiver with frog light.

[RIMKACHIP]

On this car with chinese remote, you must use pp2000 and enter to bsi and change configuration on RF receiver. Put new RF receiver with frog light.

Yes if chinese remote you must change type rf you have 4 types.


Envoyé de mon iPhone en utilisant Tapatalk

[RIMKACHIP]

If you have original key and good reference of key. You can change com2000 because antenna of rf is inside com2000.


Envoyé de mon iPhone en utilisant Tapatalk

[lmqcatarino]

If you have original key and good reference of key. You can change com2000 because antenna of rf is inside com2000.


Envoyé de mon iPhone en utilisant Tapatalk

There is no way to test that antenna before change?
It's possible problem is BSI, right?

[lmqcatarino]

Pp2000 it's lexia, rigth?
I don't have it.
Some suggestion trust place to buy?
Or could I make that change configuration on BSI with other tool?

[RIMKACHIP]

You can use autel for testing réception of rf signal or for change type of signal remote.


Envoyé de mon iPhone en utilisant Tapatalk