check this file
https://mega.nz/file/gj4U0SKa
Hi everyone,
I have here a mazda3 which starts well. But the dash needles are not working very well. I replace the dash 93c56 dump with the dump of another dash and bingo, the needles start working.
I check and compare the two dumps. Mine looks corrupted. Can you check and help me repair if so?
*
Thank you in advance.
check this file
https://mega.nz/file/gj4U0SKa
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
hi kiszka,
just a quick question, do mazda 8 need to sync ECU and Dash or BCM and Dash?
here is my data, can take a quick look is any problem with the file
https://mega.nz/file/h5hAEDyT#ik82BR...9BzDJpD4GmFoC8
thanks in advance
appreciate
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
kanatua (18th June, 2021)
will test It out whats the problem is. Thx anyway
do u think the data is ok? looks like coroupted ?
Hello someone help me with my mazda 3 1.6?
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
i have problem with error P0610 speedometer doesn't work. i would like to know if the problem is in the memory of 93c56.
I also attach a dash memory read.
I also attach the reading from the meter's memory
Last edited by amphSky; 18th November, 2022 at 10:14 PM.
Bookmarks