MIB STD2 PQ +nav Bootloop.

[Mikle1]

Hello there ,need help with MIB STD2 PQ +nav SW0363 HW31 ,i got it with bootloop VW Logo ,im try flash it in emergency mode ,but still again bootloop with logo ,attached part of log from PuTTY:

-Welcome to TechniBoot-
SVN Rev: 579332
J5e.M30.LoadImage.ready: 0x0422E139
J5e.M31.LoadImage.ready: 0x04FF54F1
J5e.QNX.LoadImage.ready: 0x1E8044EE
CPU0: L1 Icache: 512x64
CPU0: L1 Dcache: 512x64 WB
CPU0: L2 Dcache: 4096x64 WB
CPU0: VFP-d32 FPSID=410330c3
CPU0: NEON MVFR0=11110222 MVFR1=00011111
CPU0: 413fc082: Cortex A8 rev 2 600MHz NOALIGN
Loading IFS...done


System page at phys:840f4000 user:fc404000 kern:fc404000
Starting next program at vfe051524
cpu_startnext: cpu0 -> fe051524
VFPv3: fpsid=410330c3
coproc_attach(10): replacing fe081910 with fe0810cc
coproc_attach(11): replacing fe081910 with fe0810cc
Welcome to QNX Neutrino on the Texas Instruments J5 ECO MIBSTD2NAV_MAIN Board (ARMv7 Cortex-A8 Core)
Thu Jan 01 00:01:00 UTC 1970
add net default: gateway 10.200.1.2
J5e.QNX.init.ready
Waiting for i.MX...
Unable to access /net/imx6/tmp/main-startup-no
Current core file directory: /tmp
abcdefghijklmnopqr>ABCDEFCC:0x00000000
SC:0x00000000
HC: 0x00000000
GH>s>J5e.imx6.start: 0x01D32AC9

[offsystem]

i have same error could you fix it?

[dec123ua]

try to update firmware via emergency mode

[angmar]

Hello I have the same problem, MIB STD2 PQ + NAV SW 0359 HW H 31 5C0035680D VW AMAROK 2017, any solution?

[vas100]

Contact you seller software for support is easy

[mesutkb]

Sir how to put unit emergency mode?

[Mikle1]

Sir how to put unit emergency mode?

https://drive.google.com/file/d/1odJ...ew?usp=sharing

[Mikle1]

Sir how to put unit emergency mode?

Hi ,are you have converter uart to usb ?

[angmar]

Hi ,are you have converter uart to usb ?

Hi yes

Enviado desde mi moto g(6) mediante Tapatalk

[Mikle1]

https://drive.google.com/file/d/1odJ...ew?usp=sharing

use this instruction

[yan91]

hello , please help me. I have mib std2 pq plus , problem - bootloop on logo after try to backup emmc . Have log from imx6 serial:
-Welcome to TechniBoot-
SVN Rev: 650763 - Nov 21 2017 / 22:49:12
Variant: PQ stdPlus sop4 1GB LPDDR3
CAAM: CAAM_CSTA 0x00000202 - trusted Mode
CAAM: init -> ok

CAAM: open already instantiation ring 0!
CAAM: open ok
Image verified
CAAM: clock 0x00018900
type=00000004, cksum=000074A5, address=10800000, length=002A2B61
type=00000006, cksum=00000006, address=10800000, length=00000000

iMX6.QNX.LoadImage.ready: 0x0F715A7F
Enabling only 1 CPU
L2 cache enabled
CPU0: L1 Icache: 1024x32
CPU0: L1 Dcache: 1024x32 WB
CPU0: VFP-d32 FPSID=41033094
CPU0: NEON MVFR0=10110222 MVFR1=01111111
CPU0: 412fc09a: Cortex A9 MPCore rev 10 792MHz
Board version: PQ/3 v19

Detected i.MX6 Solo/DualLite, revision TO1.3

PLL1 - System : 792MHz
PLL2 - System Bus : 528MHz
PLL3 - OTG USB : 480MHz
PLL4 - Audio : 36MHz
PLL5 - Video : 339MHz
PLL7 - Host USB : 480MHz
PLL8 - Enet : 100MHz
IPG clock : 66000000Hz
IPG per clock : 66000000Hz
UART clock : 80000000Hz
CSPI clock : 60000000Hz
AHB clock : 132000000Hz
AXI clock : 198000000Hz
EMI_SLOW clock: 19200000Hz
DDR clock : 396000000Hz
USDHC1 clock : 198000000Hz
USDHC2 clock : 198000000Hz
USDHC3 clock : 198000000Hz
USDHC4 clock : 306580644Hz
ENFC clock : 24000000Hz


System page at phys:10010000 user:fc404000 kern:fc404000
Starting next program at vfe056b84
cpu_startnext: cpu0 -> fe056b84
VFPv3: fpsid=41033094
coproc_attach(10): replacing fe073244 with fe089dd4
coproc_attach(11): replacing fe073244 with fe089dd4
Welcome to QNX Neutrino on the Freescale i.MX6 MIBSTD2PLUS_CPU (ARMv7 Cortex-A9 Core)
00:00:00.213 [Info] [tsd.mibstd2.hmi.anim.cpp] [PERF:0xd773bf:IO0] iMX6.earlyRVC.ready
00:00:00.214 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda start
00:00:00.216 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: graphics init
00:00:00.255 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: graphics init complete
00:00:00.278 [Info] [tsd.videocapture.control] All rvc libs loaded successfully!
00:00:00.280 [Info] [tsd.mibstd2.hmi.bootanim.j5] initialize video capture complete
00:00:00.281 [Info] [tsd.mibstd2.hmi.bootanim.j5] mmap_device_memory successed
00:00:00.281 [Info] [tsd.mibstd2.hmi.bootanim.j5] [PERF:0x11c8ab6:IO0] iMX6X.screen.start
00:00:00.282 [Info] [tsd.mibstd2.hmi.bootanim.j5] try to load screen-mgr.so
00:00:00.282 [Info] [tsd.mibstd2.hmi.bootanim.j5] watching_thread started
00:00:00.284 [Info] [tsd.mibstd2.hmi.anim.cpp] Startup Info Thread started.
Thu Jan 01 00:01:00 UTC 1970
00:01:00.010 [Info] [tsd.mibstd2.hmi.bootanim.j5] applyCSCGamma() r: 0xffff g: 0xffff b: 0xedff
00:01:00.010 [Info] [tsd.mibstd2.hmi.anim.cpp] startup container mapped to addr 0xffde0 (length = 1048576)
00:01:00.056 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:01.129 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:01.257 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:01.450 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:01.642 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:01.834 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:03.116 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:03.260 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:03.388 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:03.516 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:03.660 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:03.789 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:03.917 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:04.045 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:04.173 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
00:01:04.301 [Info] [tsd.mibstd2.hmi.bootanim.j5] cda: splash image posted.
Unable to access "/dev/hd0" (2)
chkqnx6fs: unable to access '/dev/hd0t177' - No such file or directory
chkqnx6fs: unable to access '/dev/hd0t177.1' - No such file or directory
chkqnx6fs: unable to access '/dev/hd0t177.2' - No such file or directory
fsstate: chkqnx6fs took 0 seconds.
mount: Can't mount / (type qnx6)
mount: Possible reason: Invalid argument
mount: Can't mount /tsd/etc/swap_keys (type qnx6)
mount: Possible reason: Invalid argument
mount: Can't mount /tsd/var (type qnx6)
mount: Possible reason: Invalid argument
iMX6.QNX.init.ready
on: No such file or directory (/tsd/bin/system/startup)
00:01:05.607 [Info] [tsd.videocapture.decoder] Reset Decoder!
00:01:05.704 [Info] [tsd.mibstd2.hmi.bootanim.j5] Initialization of CaptureUnit and decoder done



please tell me , are my emmc chip is dead? Thank you

[lunarHonour]

These are the worst ~~~~ing instructions ever. They were written by a 5-yr old.

[dec123ua]

definitely