wiring diagram for renault master 2.3dci 2014 year

**goontii** · 18th October, 2020, 07:39 PM

Hi
Friends I searching for wiring diagram to Renault Master 2.3dci biturbo. I'm talking about engine because I can't find anywhere

**Meat-Head** · 18th October, 2020, 10:24 PM

Not surprised with them stats.

tried a haynes manual? Rung local stealer can you buy that info?

what is your issue?

**goontii** · 19th October, 2020, 09:14 AM

Ecu id SID309. All time have dtc p0120 from throttle. After checked wiring the conclusion is a gnd signal from the Ecu doen't come out. Gnd reaching to ECU has great connection. Ecu is changed, throttle is changed, new wiring from throttle to ecu. When I ground mass line between ecu and throttle everything is ok. But is not normal

**goontii** · 19th October, 2020, 09:18 AM

I mean GND signal from ecu to throttle.

**Louislesinge** · 19th October, 2020, 09:19 AM

Hi,
Is the engine M9T702?
Greetings,

**goontii** · 19th October, 2020, 12:35 PM

Yes. This is M9T702

**Louislesinge** · 19th October, 2020, 12:42 PM

Do not be angry but I see that you have been a member of D K for eleven years and you seem to have good technical knowledge, yet you have very few interventions ...
In any case you should at least think about pressing the buttons "thanks" and "reputation" of those who still try to help you. Here is your diagram.
Greetings,

**goontii** · 19th October, 2020, 01:38 PM

You're right, I'm sorry. I'll try to make up for it. And to serve a bit of the forum

**Louislesinge** · 19th October, 2020, 01:56 PM

Re,
Thanks in advance, good technicians help to like the forum.
On your Master seen sometimes cuted wires in the beam where it turns on the cylinder head to go EGR, Throttle and many other things. And one time on similar M9R inverted connectors between EGR and throttle...
Greetings