Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
durdur (21st October, 2020)
Hi kiszka,
My problem is that the starter does not crank and I have a DME-EWS sync fault in the engine ECU.
This failure is due to a strong battery discharge.
In the dashboard I have a different VIN and the Launch or AVDI does not want to synchronize everything. Why ????
If my ISN F62D is the same in both I have a sync problem defaut.
Thanks
I even tried the Virgin carlab on the 5p08 and the sync didn't work.
I searched and saw that it was necessary to make a virgin on the flash in some cases but I do not have what it takes.
save and check that the starter will turn
https://mega.nz/file/JzIlBAYI
save the original files to ecu too
Last edited by kiszka; 21st October, 2020 at 02:05 PM.
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
durdur (21st October, 2020)
Hi Kiszka,
the starter runs well with your dump.
Tomorrow I will try to sync the DME because it is in virgin Carlab.
Waiting for good evening and I am what it is tomorrow
Hello kiszka,
So I put back the original 5p08 file and tried to do the sync but AVDI and Launch refused me.
Hi all,
A big thank you to Kiszka for the help he gave me in the background !!!
I managed to do the sync with INPA.
Launch x431v and official AVDI failed to do the job.
kiszka (26th October, 2020)
Bookmarks