E60 525D Launch Control QUESTION

**chrisimerk** · 23rd October, 2020, 06:26 PM

Originally Posted by PelsonBMW

it wont work mate :P you set motormoment to 0 , thats why car wont start

this tested solution worked many times mate

**PelsonBMW** · 23rd October, 2020, 06:32 PM

man , ive flashed file you posted here , seriously . The car starts and cuts out, so its not working

**chrisimerk** · 23rd October, 2020, 06:43 PM

Originally Posted by PelsonBMW

man , ive flashed file you posted here , seriously . The car starts and cuts out, so its not working

here same pass its tested loads of times the first file i sent

dont change nothing with file dont try correct it or anything just flash it straight on as it is

**PelsonBMW** · 23rd October, 2020, 06:53 PM

I have changed nothing on your file. It's just not working after flash. Engine starts and shuts off after start. BTW my car is manual GB

**chrisimerk** · 23rd October, 2020, 06:55 PM

yeah will work and i mean dont run it through winols or any other software just flash it straight on

had slimier problem in past was checksum problem winols not good sometimes for checksum with bmw

**PelsonBMW** · 23rd October, 2020, 08:00 PM

I've heard about that, I'll test tomorrow

**PelsonBMW** · 24th October, 2020, 08:54 AM

Originally Posted by chrisimerk

yeah will work and i mean dont run it through winols or any other software just flash it straight on

had slimier problem in past was checksum problem winols not good sometimes for checksum with bmw

Like I said mate, I flashed it straight with Kess. Not working

https://youtu.be/-2Zs5DLQSt8

**PelsonBMW** · 24th October, 2020, 01:11 PM

so any ideas how to sort it out ?

**PelsonBMW** · 28th October, 2020, 08:43 PM

anybody ? Serioously ? nobody could help ?!

**a500tut** · 29th October, 2020, 10:13 AM

Originally Posted by PelsonBMW

anybody ? Serioously ? nobody could help ?!

Try this and report.

**mrjay88** · 29th October, 2020, 10:59 AM

Try this buddy launch control at 3500rpm and popcorn at 4800rpm checksum ok ready to write let me know pass in pm

**PelsonBMW** · 29th October, 2020, 11:03 AM

Originally Posted by a500tut

Try this and report.

So, on neutral it's not working. It works while driving xD, while I reach 3500rpm it cuts like crazy, but on neutral it is soft cut

**AVDigitale** · 29th October, 2020, 11:45 AM

we have solution about this

**PelsonBMW** · 29th October, 2020, 12:36 PM

Originally Posted by AVDigitale

we have solution about this

And? So if you have it maybe you help? I've posted here good stage 1 file for 240/550 NM Dyno tested file that is working since 60kkm with dpf egr speed off and with working LC but soft one. All I want is popping LC, that's it. But first I will test MRJAY file.