A6 2.7 TDI - Swirl flaps OFF ?

[alme94]

Hi friends, i have a problem with swirl flaps,can anyone turn off it for me ? big thanks
sw: 1037377322

[oliva]

.......................

[alme94]

.......................

friend thanks but this gonna wont work, and its not mine file, 50% Differences with mine, and look at swirl map, didnt change anything, switch still 0 ..and maps not at 50 percentage ....do you have please working file ? thanks

[oliva]

Disconnect the flap actuator and read the DTC

[alme94]

P3348 - Boost control circuit, electrical malfunction
- Permanent

[Tawe]

P3348 - Boost control circuit, electrical malfunction
- Permanent

You have problem with turbo actuator, not swirl flaps (according to DTC above). If it is already changed, it is not calibrated as it should, or it is faulty.

[alme94]

You have problem with turbo actuator, not swirl flaps (according to DTC above). If it is already changed, it is not calibrated as it should, or it is faulty.

I disconnect flap actuators, just that dtc get, i know its from turbo actuator but i thinked that is in some kind synchronised and getting that fault ... if I disconnect flaps and read dtc, and nothing get, obviusly its someone before me doing something in this map like clear just dtcs and nothing else

[Tawe]

I disconnect flap actuators, just that dtc get, i know its from turbo actuator but i thinked that is in some kind synchronised and getting that fault ... if I disconnect flaps and read dtc, and nothing get, obviusly its someone before me doing something in this map like clear just dtcs and nothing else

In some versions, you may have problem with turbo actuator if TVA (throttle valve actuator) is disconnected, but with disconnected swirl flaps (2x intake manifold actuators) there shouldn't be a problem.

[alme94]

In some versions, you may have problem with turbo actuator if TVA (throttle valve actuator) is disconnected, but with disconnected swirl flaps (2x intake manifold actuators) there shouldn't be a problem.

I understand, would you plesae take a look on mine moded file, is it okay? I put it in attachment ..
switch 1, corrections to zero and flaps to 50% ..

thank you

[Tawe]

Your first file already have tune, egr off, dtc off, flap off, tva off, so will be good. Search for problem in the turbo actuator itself, or its adjustment.

[alme94]

Your first file already have tune, egr off, dtc off, flap off, tva off, so will be good. Search for problem in the turbo actuator itself, or its adjustment.

as i can see in first file it does just dtc off about flaps, because of that i have problem with flaps but when i disconnect it, i dont have any dtc then .....i think mine last file would do a job