peugeot partner 5ws40025d-t immo off

**kamionk** · 21st December, 2018, 10:06 AM

hi all
im need immo off in partner 2.0 hdi siemens driver 5ws40025d-t Sid 801
how read end write this memory because this solution not work

Just change like that:important in RED
0 1 2 3 4 5 6 7 8 9 - A B C D E F
0000:xx xx xx xx xx xx xx xx-xx xx FF FF FF FF FF FF
0010:8F 01 00 00 07 00 02 0C-00 00 XX XX XX XX XX XX

0040:XX XX XX XX XX XX XX XX-XX XX XX XX XX XX FF FF
0050:FF FF FF FF 8F 01 OO OO-07 00 02 0C 00 00 XX XX

this org bin
please help

**rafal** · 21st December, 2018, 10:34 AM

what are you used to read?
your files are bad............

**chafik4051** · 21st December, 2018, 10:38 AM

try and report,
file for you 100% working
pass in pm.

**kamionk** · 21st December, 2018, 01:15 PM

use willem, read 8bit ok, 16bit not sure

**kamionk** · 21st December, 2018, 06:47 PM

thanks for help but this file not work

**rafal** · 21st December, 2018, 07:16 PM

Originally Posted by kamionk

thanks for help but this file not work

are you sure that problem is with immo?

**kamionk** · 21st December, 2018, 07:55 PM

yes because orygynale file work , only somtime keys loose immo end light

**rafal** · 21st December, 2018, 08:12 PM

try this one
if will not work , change programmer and read again

**kamionk** · 21st December, 2018, 10:33 PM

ok
this file start only need key with immo, im think if all file its vergin end total immo its imposible, meybe need change flash?

**cbarry** · 23rd October, 2020, 11:39 PM

Hello everyone, I have this very same ECU, and I burned up the 93c56 Eeprom, don't have a previous back up, its there an file to program
an empty Eeprom to make it work, is any of the above suitable??