Hi guys, i have little problem. I added smart key to mazda cx5 2014 with obdstar x300 pro3, programming finished good, key working, starting engine, remote, all smart.. both keys work perfect (original one and new one) but on dash came messege for immobilizer problem (please visit workshop). Everything work, but messege on dash. Tryed to remove battery some time, didnt help. Car has 3th key that is lost. Any suggestion? I thinking to do all key lost to remove 3th key but dont know if keys will be learned again or i'll need 2 new keys.
baygrozdan (25th October, 2020)
Only smok will help? Any other tool or solution?
I"ve got same issue with China keys
https://www.digital-kaos.co.uk/forum...ead.php/827601
baygrozdan (25th October, 2020)
So problem are china keys, or difference between number of buttons on new key. Anyone has idea if i make vvdi smart key, should it be ok?
If i do AKL, can i add original key and new one, or need 2 new keys?
baygrozdan (25th October, 2020)
ok, ill try and report, but anyone tryed AKL with one original key? will it work again?
When you will add key and its inproper type then yes, it will work and you have error on dash. When you will erase all keys and add only one even proper type it want work because mazda and ford need at least 2 Keys to be programmed to allow start.
baygrozdan (26th October, 2020)
Oh i know that, asking if i can use original key again, reprogram it to the car, and use second proper key
Yes, no issue to do this
baygrozdan (26th October, 2020)
So tested. AKL and added two keys with same number of buttons and messege gone.
Bookmarks