Hi guys,
I have problem with car. When i put card immo lights still and light in card reader blinks.

There is no ignition.
Immo light on ( not flash)

I can connect to UCH - there is error DF002 - blocked steering lock - 1.def - problem electronic supply not identified.

Start/stop button - works ok

Card reader - ok was changed by another workshop. UCH see card and codes.

fuses checked under hood and in UHC

Steering lock wheel -I bought a used steering lock and made virgin. when I connected the "new" lock, the immo light was blinking and after a while it started to glow with a constant light. Error was the same. I check eeprom memory and i see that data changed so steering lock wheel module got codes.

Supply to Sterring lock wheel is ok.


I am not sure if the steering lock and uch is ok.