FORD RANGER BCM 2014 NO HEADLAMP ISSUE

[KOMMENDS]

Hi

I have a Ford ranger 2014 with headlamp issue the BCM is similar to BMW FRM the flash prevents lights form working and the D FLASH needs resetting, i have read the files with Orange 5 its a XEP100 4M48H/5M48H MCU
the D FLASH doesnt look like any downloaded from DK ?

Would appreciate any help on this

[smirnoff_rules]

had 2 of these with broken wires to n/s/f (uk) right by the lamp , but you have to clear codes before light works again

[KOMMENDS]

Hi

The garage have checked the wiring and the codes wont clear in the BCM, there is a chap on here that resets the D flash of the MCU

had 2 of these with broken wires to n/s/f (uk) right by the lamp , but you have to clear codes before light works again

[darrenhyland]

Ordinary or aftermarket LED headlight bulbs? Had one recently that wouldn't clear codes in BCM due to LED bulbs fitted. Replaced with ori type and all good.

[luis12]

Check if are set U3000xx codes, this Modules turnsOff the circuit permanently if the counter reaches 50.

[KOMMENDS]

Check if are set U3000xx codes, this Modules turnsOff the circuit permanently if the counter reaches 50.

Yes I have that code but the D flash is more or less empty it’s not as populated has the D FLASH i downloaded to compare


Sent from my iPhone using Tapatalk

[Meat-Head]

Can you flash the leeched file to try?

[KOMMENDS]

Can you flash the leeched file to try?

Yeah didn’t work


Sent from my iPhone using Tapatalk