Help Jaguar XF dead no ignition

**Manta1600** · 11th January, 2021, 06:54 PM

Jaguar XF 20014 - BCM DPLA-14C104-AD

I tried to repair central locking and made passenger door recalibration with JLR SDD and after that car is dead - no ignition

Strange is that I have access to the BCM and the car see the keys that is inside the car but no remote no ignition keyless no ignition on emergency coil

I programmed new key by OBD the same situation

only 1 error in BCM - B102B-67 - Passive Key

Tried battery reset no success

**sdnatlst** · 11th January, 2021, 07:22 PM

i had this before at a main dealer after dead battery, exact same error code no ignition no remote - replaced BCM with used part same number and reconfigured with SDD and keys and remotes started working again

i guess something is wrong with bcm flash but not enough for you not to get comms.

it will retrieve key no. from kvm i think so possibly not relevant ,

**Manta1600** · 11th January, 2021, 08:53 PM

Originally Posted by sdnatlst

i had this before at a main dealer after dead battery, exact same error code no ignition no remote - replaced BCM with used part same number and reconfigured with SDD and keys and remotes started working again

i guess something is wrong with bcm flash but not enough for you not to get comms.

it will retrieve key no. from kvm i think so possibly not relevant ,

Original SSD online or clone?

**eliaselias** · 11th January, 2021, 10:40 PM

PM ME I CAN FIX BY TEAM VIEW

**super jumbe** · 11th January, 2021, 10:49 PM

If it looks like this I will adding a key over the weekends has any one done this with lonsdor?

XF Proxy Remote (2009-2012).jpg

**eliaselias** · 11th January, 2021, 10:53 PM

Originally Posted by super jumbe

If it looks like this I will adding a key over the weekends has any one done this with lonsdor?

XF Proxy Remote (2009-2012).jpg

MAKE SURE THAT OLD KEY IS WORKING FULL proximity before you try to program new one..

**ghostrider72** · 11th January, 2021, 11:03 PM

And make sure boot will be open as it happens on me twice that i had to disconnect battery after coding coz car wouldn’t start after

**Manta1600** · 11th January, 2021, 11:15 PM

Originally Posted by eliaselias

PM ME I CAN FIX BY TEAM VIEW

Thanks elias

**Manta1600** · 11th January, 2021, 11:18 PM

Originally Posted by super jumbe

If it looks like this I will adding a key over the weekends has any one done this with lonsdor?

XF Proxy Remote (2009-2012).jpg

No this on your picture is the old model key - Never had problem with this model

**fred77** · 11th January, 2021, 11:21 PM

Originally Posted by Manta1600

Jaguar XF 20014 - BCM DPLA-14C104-AD

I tried to repair central locking and made passenger door recalibration with JLR SDD and after that car is dead - no ignition

Strange is that I have access to the BCM and the car see the keys that is inside the car but no remote no ignition keyless no ignition on emergency coil

I programmed new key by OBD the same situation

only 1 error in BCM - B102B-67 - Passive Key

Tried battery reset no success

The JLR bulletin did say that might happen ... replacement of BCM.

Unlucky my friend. Maybe re-flash it / 2nd -hand unit. Let us know how you get on

**sdnatlst** · 12th January, 2021, 08:35 PM

Originally Posted by Manta1600

Original SSD online or clone?

STIC DOIP SDD hardware tool with proper software/login.

**fred77** · 12th January, 2021, 09:09 PM

Originally Posted by ghostrider72

And make sure boot will be open as it happens on me twice that i had to disconnect battery after coding coz car wouldn’t start after

Crappy diagnostic tools do this !!
Remember 1st time happened to me I crapped myself

using SmartPro to do BCM coding and the Abrites the keyless (or vice-versa). Terrible software we have to put up with using mis-match of tools then reseting battery

**godfathertre** · 12th January, 2021, 10:00 PM

I personally would not touch these vehicles too risky take into consideration time and money if it goes wrong not worth the risk rather loose a job than spend 1000 or several days fixing it.

**ghostrider72** · 12th January, 2021, 10:07 PM

Originally Posted by fred77

Crappy diagnostic tools do this !!

That actually happened with Abrites

**Manta1600** · 12th January, 2021, 10:22 PM

Today after few attempts to force ignition with Autel and then connect the SSD I wiped the VIN number on the FCJB - Front BCM

Then reprogramed the FCJB and the keys work again to switch the ignition on but wont crank and the VIN is still wiped

After few minutes I disconnected the charger to close the tailgate and the car started - VIN is still wipped - error U3002-81

Now keyless start work and remote work