Juke_fault_codes.jpg
Thia was the fault codes.
I have used truecode with glovebox pincode.
Car came to garage for spare key after battery was dead all went good after 6 days customer said the old key stopped working, the new key was working good, when I went to programme old key it says pin not accepted, now both keys won't start car, is there any solution? Is there any way if I remove BSI and make key, the other issue I have noticed the fault code will not be erased, any help very much appreciated thanks.
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
Juke_fault_codes.jpg
Thia was the fault codes.
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
Juke i've did alway 4 digits pincode. Even model 2015.
Be polite. No Thanks + Rep, no HELP!!! Slava Ukcraine. Dead Putler civilians's killers!!!
super jumbe (24th January, 2021)
Ignition key I presume?
Yes, it is in the list of Tang.
2010 and 2011
Two different types of eeprom.
Maybe one is for regular and the other for prox. But I am not sure.
super jumbe (24th January, 2021)
Do you have a better picture, with the dtc on it?
super jumbe (24th January, 2021)
Yesterday I've done Juke 2017 AKL with 4 digit pin code with smart key
as you told, all Juke's that I had was 4 digit code
-----------------------
Maybe exist juke with Micra immo that need glovebox code
on Micra I had problem after flat battery the car forgot the original key I reprogrammed the key and the customer sell the car on 1 hour driving from me
after 1 week he call me that the car lost the key again, then I went there and I programmed new and reprogrammed the original one for free
After 1 month the customer told me that the car again can't recognise the keys and I told him that I don't wan't to see any more this car
Last edited by Manta1600; 23rd January, 2021 at 11:57 PM.
super jumbe (24th January, 2021)
most are four digit but there is also some that require glovebox code converting , plenty have seen these though i havnt and all ive done have been 4 digit.
super jumbe (24th January, 2021)
I used GLOVEBOX 12 digit label number then gave me the pincode when I last used to programme new spare key.
Glove box sticker label number: A372AF1703E9
Gave me this code to programme: 1430DAD556A2
I used truecode was asking for 12 digit pincode, look I have done with truecode lots of Nissan this is the one giving me the issue, look whats the solution?
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
super jumbe (24th January, 2021)
I've never met yet key lost in memory. But i repair many NATS5 immobox around ignition lock that just ignore the key.
Maybe in Micra, wirring problem or BCM? I don't think memory can lose easy by that way.
Also SSangyong immobox many not recognise keys, you can recode but problem come back again. I alway repair and say goodbye.
Be polite. No Thanks + Rep, no HELP!!! Slava Ukcraine. Dead Putler civilians's killers!!!
p1et (24th January, 2021), super jumbe (24th January, 2021), Weasel3 (24th January, 2021)
I recently made a akl to this vehicle, using Zed full, the problem was that I could not make a second key that the customer wanted no matter what I tried.
For your problem , try to do programming using another device, maybe it will work
super jumbe (24th January, 2021)
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
super jumbe (24th January, 2021)
Last edited by super jumbe; 24th January, 2021 at 01:05 PM.
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
Manta1600 (24th January, 2021)
Has any one made a key from BSI Dump on Juke 2012 with tango?
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
Bookmarks