Fiat Ducato(250) 2012 CNG/petrol Remote Key precoding

[Staafonline]

Hello guys i need some help about this wonderfull gem.

i need to know how i can precode a remotekey for this BCM it is a little bit different from the normal 2012+ Magneti BCM's that is that the CAN lines are on different pins AVDI, Zed Full and Lonsdor are unable to communicate with the BCM through OBD.
Multiecuscan can communicate through adapter line that switches CAN lines so if i have a precoded remotekey i should be able to program it to the vehicle.
is there any keyprogrammer that can communicate via OBD to make a precoded remotekey for this vehicle? or is there a way i can precode the remotekey myself?
i have the original pincode on the plastic card also.
just cloning the transponder wont do i really need a remotekey for this vehicle.

Hope someone can help me out?

BCM info CNG.jpgBCM keylearn.jpgECU CNG.jpg

[patrickmk3]

hi my friend did you found a solution i have the same problem.
what i do is copy transponder and remote to but only possible if there is still a remote available.
so also not a perfect solution.
thats why curious to know if you found a solution.
i have magneti marelli bsi 1369218080 i can do key coding with autel im608 but can not read pincode so thats my problem.
autel im608 lonsdor and xtool could not read pin.

[p1et]

This BSI have 95160 eeprom inside like the other ones which are easily programmable by OBD?

[patrickmk3]

This BSI have 95160 eeprom inside like the other ones which are easily programmable by OBD?

hi my friend thanks for your response.
no 95160 eeprom in this one.
and obd program londor can not do this one and xtool x100 pad2 pro can not do it.
autel im608 immo menu not possible to
but in bsi module true autel it give me option key learning can not try it because dont have pin.
but this one is realy differant than the rest of the ducato boxer jumper series.
i can do all of them but this one i can not get it to work.

[patrickmk3]

magneti marelli
503440990100
NBC250T. 01
1369218080
H6LC6X38M

[Manta1600]

Today I had Iveco 2012 ID48 95320

Autel read the 95320 by OBD and programmed the key under Ducato 2006-2012

but not possible to program the remote - I tried one used and one KD

[patrickmk3]

Today I had Iveco 2012 ID48 95320

Autel read the 95320 by OBD and programmed the key under Ducato 2006-2012

but not possible to program the remote - I tried one used and one KD

there are more version to program with kd.
last time i have jumper i tried one signal was getting to bsi but not correct.
i try other one than it worked.

[Staafonline]

I do it on bench and take out BCM read-write eeprom 95640 and precode and program remotekey with TMPro2 if more than 2 keys i program extra with multiecuscan and pincode

[patrickmk3]

I do it on bench and take out BCM read-write eeprom 95640 and precode and program remotekey with TMPro2 if more than 2 keys i program extra with multiecuscan and pincode

thanks for your reply.
i have same number bsi but still not that eeprom.
this is also fiat ducato 250 3.0 cng 140 natural power

[p1et]

Post pictures of the BSI board.

[patrickmk3]

hello,

here are some pictures.
if more is needed pleas ask.

greetings,
patrick

[p1et]

Of course there is eeprom 95160.

If no OBD communication, you can do like in post #8.

There are only few tools which can make working remote by dump programming.

[Staafonline]

hello,

here are some pictures.
if more is needed pleas ask.

greetings,
patrick

InkedIMG_20200910_172248_LI.jpg

Read in-circuit or desolder 95160 precode/program remotekey write back new file to 95160. remote should work after put back bcm in car and ignition on. thats it job finished.

[TERMINATOR1000]

my shitty X100pad2 read Immo Data by OBD2

[patrickmk3]

my friends thank you very much with your help i made it a succes