OP-COM Software Free4All

**fantomel** · 1st November, 2023, 10:54 PM

All FTDi drivers till 2.10 included are good to not get the activation messages. On newer version you will get that, so install for your interfaces older version till 2.10 included.

**RANONC** · 4th December, 2023, 07:26 PM

Thanks you very much Fantomel

**RANONC** · 5th December, 2023, 07:34 PM

Hello. I have an opcom purchased on aliexpres that curiously comes with the Fantomel 200603 version with a pendrive that had to be connected to install the program. My Insignia 2014 reads all the modules but I cannot read measurement blocks. I have tried the version of Fantomel 191022 advance but it does not recognize the ecu and the 161001 adv either. The same thing happens to someone. Thank you

**jasepotter89** · 15th December, 2023, 06:23 PM

Originally Posted by Mario6

You're having a hard time finding it.
Check the first page of this topic carefully. You will surely find all SW Opcom from Fantomel.
Current Link is on : YANDEX

https://www.digital-kaos.co.uk/forum...ighlight=opcom

Hi, I can see pdfs with pictures of the PCB, but where is the software files to download ocflash & the opcom SW? I can't see them anywhere on that page? thanks in advance.

**Mario6** · 15th December, 2023, 09:17 PM

Originally Posted by jasepotter89

Hi, I can see pdfs with pictures of the PCB, but where is the software files to download ocflash & the opcom SW? I can't see them anywhere on that page? thanks in advance.

Download

"yadi..."

"Click a Link and let me know the result".

**jasepotter89** · 15th December, 2023, 11:56 PM

Originally Posted by Mario6

Download

"yadi..."

"Click a Link and let me know the result".

Thank you very much, much appreciated, I couldn't figure out where to find the download link at first then wasn't sure which link was correct/working, thank you for helping me out, hopefully I can get sorted now. all the best, thanks again

**makor1** · 1st January, 2024, 11:33 AM

Thank you very much Fantomel!

**macho288** · 16th May, 2024, 06:08 PM

hello, please help me, I want to order an opcom, but I don't know where to buy and where I didn't understand what the good interfaces are and which works on all Opels, I have an Opel Insignia 2011, please help me with an advice, thank you

**zootyo** · 25th May, 2024, 05:42 PM

Hi!

I saw in a youtube video that with opcom (opcom eprom dump tool) you can calculate the car pass from the eprom content. Which version is it in? I saw that in the main window, before selecting the vehicle, you have to click twice and the tool will appear. I know that for this you have to read the eprom content from the radio or the tid, but it would still be a big help.

Thanks

**djb2002** · 25th July, 2024, 06:23 PM

What would be the cheapest device to purchase that would be compatible with this later Opcom Software ?

Does anyone know if this version is capable of doing the re-learn procedure for an Astra K - Clutch pedal sensor.

Thanks in advance

**krnjaa** · 4th August, 2024, 10:01 PM

Thank you so much for your excellent work.

**sadfi** · 12th September, 2024, 12:32 AM

Many thanks for this!

**soulmandave** · 5th October, 2024, 05:10 PM

Hi all.
Looking for a little advice / help / guidance here.
I've downloaded the Opcom Professional version of the software and have installed it onto my Windows 11 based laptop.
The program appears to have installed without any problems, the little pop up showing the two driver packages ticked also appeared, and I'm pretty sure I followed the install instructions to the letter.
I plugged my Opcom interface into the laptop, did the "Test Interface" and nothing happened.
I then went into device manager and the Opcom interface is recognised but when clicking on the details it states that "No drivers are installed for this device"
I've gone through the "Update / install Driver" process, etc, without success.
Am I missing something here ?
I've included two pictures of the front and back of the interface, hopefully for confirmation that I do have a "Good" interface.
Your help / advice would be much appreciated.

Regards, Soulmandave.Pic 1.jpg Pic 2.jpg

**Mario6** · 5th October, 2024, 08:40 PM

Try disabling the "digital driver signature" request. Drivers are located in the Opcom root folder (DRIVER). If you use SW Opcom from Fantomel, they work best on OS WIN 7 32bit.

**soulmandave** · 5th October, 2024, 09:08 PM

Originally Posted by Mario6

Try disabling the "digital driver signature" request. Drivers are located in the Opcom root folder (DRIVER). If you use SW Opcom from Fantomel, they work best on OS WIN 7 32bit.

Thank you.

I'll have a look at that tomorrow, when I get some spare time.
(Busy day planned tomorrow)

In your opinion, does the Opcom interface look like a "Good" one ?

Regards, Soulmandave.