Clarion PN-1721F immo off

[Slava111]

Hello to all!
Can anybody dissable immo in Nissan Clarion audio PN-1721F?
It has 93c46 rotated eeprom

[petronijul]

read again eeprom whit 16bit mode

[Dekster]

Hello to all!
Can anybody dissable immo in Nissan Clarion audio PN-1721F?
It has 93c46 rotated eeprom

Hi,
Try ..........

93c46_Off_Secure.rar

[Slava111]

read again eeprom whit 16bit mode

in 16bit mode it is the same, only more FF in the end of file

[Slava111]

Hi,
Try ..........

93c46_Off_Secure.rar

Can't download, forum does not allow

[petronijul]

but file look is bad

[Slava111]

Here it is in 16bit mode

[Dekster]

Here it is in 16bit mode

.......................

93c46_x16_.rar

[petronijul]

sorry read with 8bit mode

[Slava111]

.......................

93c46_x16_.rar

Thank you, I will try and report

[Slava111]

Unfotunately not working without immo
It only makes radio to be new

[shooting]

Unfotunately not working without immo
It only makes radio to be new

Do not write with current settings, you will have a brick...
Read in 8bit mode, above are all 16bit mode
Dump should start "AA AA"

wbr

[Slava111]

I write it in 16bit mode
String in programmer AAAA AAAA 42AA C51A. When i install the radio without immo it writes "Wait initialising", when I add immo radio turns on.
String after initialising is AAAA 0000 42AA C51A

[shooting]

I write it in 16bit mode
String in programmer AAAA AAAA 42AA C51A. When i install the radio without immo it writes "Wait initialising", when I add immo radio turns on.
String after initialising is AAAA 0000 42AA C51A

Only way now is re-init by OBD tool, you lost your immo data

wbr

[Slava111]

But it is working.
The radio works only when immo is connected, when immo is disconnected radio shows "SECURE".
The main goal is to throw away this buggy immo