did you save backup ?
Hello everyone
I have a Toyota Corolla Verso 2008 2.2 D-4D 130 KW (177HP). I have read the flash dump with Ktag and made DPF off with DPF remover, I write this dump and for moment car work fine. After some 2 or 3 KM car go in LIMP MODE and no error code. I have remove the fifth injector plug but no succes. So i decided to write again the original dump file but again car is in limp mode max 2000RPM no more.
Please any help with DPF off and LIMP MODE off for my problem. Below is original flash that I have read
did you save backup ?
evisdaci (3rd March, 2021)
Unfortantly no. The ECU is DENSO
HW 89661-0F090
SW 89663-0F091
SW upg 30F09100
175800-0F090
Last edited by evisdaci; 3rd March, 2021 at 10:25 PM.
Hi Frend. Your dpf off. Give thenks and pass priv.
Limp mode is removed ? Because car is in limp mode
Pass please
Last edited by evisdaci; 3rd March, 2021 at 10:46 PM.
This is the version with full dpf and limp removed. Upload and check. I did a lot of these Toyota and it worked fine. I sent the pass to priv.
evisdaci (3rd March, 2021)
Thank you. Tomorrow I will test and report back
I solve the problem the problem with another dump file downloaded from another topic and make it DPF off with DPF remover and everything is OK now
Never mind posting the solution
Bookmarks