Carprog clone 8.21 reflash faild , help

[constantinexx]

After reflash using J-link , usb device is not recognized ,
I broke the pin 55 , but i was able to reflash it successful , should i reconnect the pin 55 back to its place ?? Or keep it connected to the ground ??
Please help , and is it possible that the bin file is corupttebd?? Ist
Thanks in advance

[budata]

After reflash using J-link , usb device is not recognized ,
I broke the pin 55 , but i was able to reflash it successful , should i reconnect the pin 55 back to its place ?? Or keep it connected to the ground ??
Please help , and is it possible that the bin file is corupttebd?? Ist
Thanks in advance

After programming pin 55 to ground must be mandatory .........

[constantinexx]

And the eeprom can be replaced ??, can you provide a dump file for it please ?? because i placed it the wrong way and it got hot for a couple of seconds , if its damaged can i replace it , iam talking a bout the EEPROM not the MCU

[budata]

And the eeprom can be replaced ??, can you provide a dump file for it please ?? because i placed it the wrong way and it got hot for a couple of seconds , if its damaged can i replace it , iam talking a bout the EEPROM not the MCU

I don't know how much it will help you ......AT88SC.rar

[constantinexx]

and the at91SAM7S256 bin please , i have one but not sure its good , it broke mt MCU

[constantinexx]

I don't know how much it will help you ......AT88SC.rar

hi
can you provide an update file for my carprog MCU its clone v8.21 , i need the bin file , i have one but it seems that it broken

[budata]

hi
can you provide an update file for my carprog MCU its clone v8.21 , i need the bin file , i have one but it seems that it broken

Here is everything you need ....... https://www.digital-kaos.co.uk/forum...ything-Carprog

[constantinexx]

thx alot , i saw the post but i thought thats too old thx again

[budata]

thx alot , i saw the post but i thought thats too old thx again

Old, but up to date .....