Is this cable in question?
— GREEN — CAN L;
— ORANGE (2 шт) — VKEY;
— YELLOW — K LINE;
— RED (2 шт) — VECU;
— BLACK (2 шт) — GND;
— PURPLE — VPP;
— WHITE — CAN H;
— BROWN — RESET;
— GRAY — BOOT;
— BLUE — CNF1.
Hi,
I need the BDM port pinout for connect a EDC17C60 to a KTAG.
I have bought the 14P600KT04 adapter and the 14P600KT03 cable. But they take several days to arrive and I need to recover an ECU urgently.
Can someone pass me the pinout from the BDM port of the ecu to the DB15 connector of the Ktag and where to connect the boot cable?
Thanks in advance
If my post was helpful press Thanks button!!
Is this cable in question?
— GREEN — CAN L;
— ORANGE (2 шт) — VKEY;
— YELLOW — K LINE;
— RED (2 шт) — VECU;
— BLACK (2 шт) — GND;
— PURPLE — VPP;
— WHITE — CAN H;
— BROWN — RESET;
— GRAY — BOOT;
— BLUE — CNF1.
marcolr (9th April, 2021)
Are you talking about 14P600KT02 cable for Kess?
Sorry, I misunderstood your question in # 1.
Maybe this will help you?
Last edited by 2xded; 10th April, 2021 at 07:40 AM.
ecufix (9th December, 2022), marcolr (10th April, 2021), mexanico1971 (4th April, 2023), tordu (10th June, 2021)
Thanks for your effort mate but or I explain bad or you don´t understand my problem.
I need connect the ecu as in the last page of PDF "GPT PSA_2" that you uploaded, but I don´t have the 14P600KT04 adapter or the 14P600KT03 cable (the last two pictures that I uploaded in the post 6)
Then I need the pinout for connect the ecu to Ktag (from BDM port of the EDC17 to DB15 of Ktag) and with this pinout, I can connect the ecu without adapter (by soldering cables).
I already bought the 14P600KT04 adapter and the 14P600KT03 cable, but it´ll arrive in 15 days to my house and I need recover a faulty ecu.
Regards
If my post was helpful press Thanks button!!
2xded (10th April, 2021)
I suppose the connections can be made with ordinary wires according to the diagrams from my post. This is certainly inconvenient, but possible, IMHO.
Does the tricore have a BDM port?
Not. there are only pins that you can already find on the connector side (can bus, gnd, ign, vcc) there are no special bdm pins. Wrong way to recover ecu. It is better to describe your problem in detail.
Last edited by proel; 11th April, 2021 at 08:06 AM.
marcolr (11th April, 2021)
marcolr (11th April, 2021)
How to explain this to a topic starter?
marcolr (11th April, 2021)
It is always better to ask people on the forum how to solve a problem instead of developing theories for a solution ... simply
marcolr (11th April, 2021)
Bookmarks