Opel Vivaro 2017 key programming help

[Antonio266]

Hi to all, i have to make a second key with remote for an Opel Vivaro 2017 (It's pratically a Renault Trafic). I will attach the original remote that customer already have and what has read the TMPro from it. For programming i have Autel IM608 or OBDstar x300. I've never done a Vivaro so i want to know from who has already done this job.

For programming with Autel (or something else) i have to enter in Renault Trafic? The key programming procedure is like a Renault car or it's like Opel (Pull out 4 digits pincode ecc..)? And last, can i use an Xhorse remote for this Hitag AES-ID4A? I was thinking about the Xhorse MQB style smart keys (but with blade) if i can use it.

I hope someone can help with my doubts, thanks

[lion0304]

Battery support and hold process take about 25 minutes.

I've did Trafic with X300 before get Autel. I think IM can do too.

[Antonio266]

Battery support and hold process take about 25 minutes.

I've did Trafic with X300 and before get Autel. I think IM can do too.

Are you sure it's 25 mins procedure like Smart 453/Twingo?
I've seen this on youtube, few minutes procedure like other Renault cars..
https://youtu.be/XbCVGnyvG-Y

[lion0304]

Are you sure it's 25 mins procedure like Smart 453/Twingo?
I've seen this on youtube, few minutes procedure like other Renault cars..
https://youtu.be/XbCVGnyvG-Y

Do it by youself and get correct answer!!!

[lesakljucevi]

Yes You right, power support and 25 min. with IM508 and good internet conn

[Manta1600]

I tried with many XH keys with im608 and the remote not work

The remote of the customer key work fine but the XH key only start the car

The key is 4A

[Antonio266]

I tried with many XH keys with im608 and the remote not work

The remote of the customer key work fine but the XH key only start the car

The key is 4A

Thank you for this feedback, to be sure i will order an aftermarket remote..

[Jimmy07]

IM 608

Good internet
Battery support
Tablet charged
Aftermarket remote

Follow on screen instructions carefully

Done

[TERMINATOR1000]

Are you sure it's 25 mins procedure like Smart 453/Twingo?
I've seen this on youtube, few minutes procedure like other Renault cars..
https://youtu.be/XbCVGnyvG-Y

If car is unprotected , already add key or AKL , just need 3 minute ! This video is an fake like CAS4 & FEM BMW

[p1et]

I believe Smart Pro do key programming straight forward in 3 minutes

[fred77]

Yep SmartPro does in ~3 minutes

No pee'ing about done few best tool on these

[Evernemi]

Autel will take 25-30 min . Use battery support . You need a 4a key

[TERMINATOR1000]

I believe Smart Pro do key programming straight forward in 3 minutes

We talking about AUTEL fake tutorial on YouTube , i use this option too , with AVDI in AKL situation , 3 minutes AKL ! BUT IF procédure fail BCM car is dead ...
Better is to read flash for add key , in case of problem you just rewrite it and car wake up .
Twingo 3 & Trafic 3 are very risky cars , that is the reason why R.E.T UCO don't support this cars ...


Smart pro use 20€ token / key , other are free to use

[rapidlocksmiths]

smart pro does use expensive tokens unless you buy software outright of course , but it does do the job very quickly .

worth mentioning that TDB1000 also does these on spare keys ( not AKL yet ) not as fast as smart pro but gets job done , a nice touch they have is the patches to repair if it goes tits up so is safe to use on these for spare key jobs and a far lower cost than alot of other tools as well , also there support seems very good.

good battery support is essential on these

[lion0304]

I tried with many XH keys with im608 and the remote not work

The remote of the customer key work fine but the XH key only start the car

The key is 4A

Chinese after market AES work well.

Also I've tested CHinese key and genuine key renew by KD work too.