2M2 Magic Tank Problem

[sheehac]

Hi im new in auto locksmith business but have worked in motortrade for over 30 years, ive programmed many keys in those years but not done much Key Cutting. iVE BOUGHT A 2M2 magic tank and need to cut a HU83 key for a Peugeot RCZ im in the UK by the way. Ive attempted 4 times there are 3 setting for HU83 standar 7 cut, 8 Cut which i assume is for rover 75 and min and there is HU83 L 7 cut, all 3 cuts have been tried and none fit ignition or door lock. Im not sure where to go with this but any help would be greatly appreciated. ive included pictures the cuts look similar but not quite right.

[Weasel3]

Try to update the app. To the latest software. And also firmware.

Clean the original key key with brake cleaner, or similar. Before doing any decoding.
Grease and dirt can brake the probe. But also give you a false reading.

And remove any dust from the machine, close to the clamp.
And also do calibration.

If not any progress.
Contact support of the machine.

[sheehac]

Well i sorted it i had to cut it on universal key duplication and then modify end a touch with a dremel

[P&D]

Easier just inputting the cuts Extra 3411231

[lion0304]

Easier just inputting the cuts Extra 3411231

No, 2M2 has problem to cut HU83 and it still not solved yet. Last i use work in igntion and not the door.