Hallo, i need help with a converted Lupo 3l from AT to MT. Car will only start for short then Die off. Got an old ECU from polo 1.4TDI. and trying to
swap eeprom with VAGCAN+K V2.5 FULL software and K-DIA 409 interface + immo off with eepromtool.04 . with CMD tool i always get Warning couldnīt decode IMMO ID . all other changes worked it seemes / VIN / IMMO OFF / . ANY IDEA SOMEONE . what kind of problem could it have ?
Read in 512bytes
WARNING: cannot decode ImmmoID
EEPROM Status:
- Type: ECU_eeprom
- Version: Immo2
- VIN: (
"
- SKC: 012079
- Immobiliser: Error, set Immo - Current values: 0x12 = 0x35, 0x22 = 0xFF
- Checksum: Invalid Checksum
- Size: 512bytes
- Cluster Code: FF FF FF FF FF FF FF
- P0601 DTC: set to FF FF
- Immo ID:
- Softcoding ID: 0255
- Tuner Tag: Not Set
- Flash Programming (successful): 0
- Flash Programming (attempts): 192
is here anything wrong ?
Bookmarks