here..............post also flash
here..............post also flash
need help
now my goal is to buy xp-005
who will help?
brend (13th April, 2021)
same pass............
need help
now my goal is to buy xp-005
who will help?
brend (13th April, 2021), carsandkeys (14th April, 2021)
crc - do not need
are you sure that immo problem?
my file is correct
maybe bad soldering?
have a look here:
https://www.digital-kaos.co.uk/forum...ght=0281011081
need help
now my goal is to buy xp-005
who will help?
carsandkeys (14th April, 2021)
I dont need modified eeprom, right? i restored original file before wrote your flash file. I read the flash for test file but write is ok! i have conection with ecu but not start.
I dont think this is a problem of bad soldering.
The car comes with BSI problems, but the engine shows no faults, only the immobilizer, it has CKP and CMP signals but the injectors do not inject. I'm going to check because it doesn't want to start
you need write both - eeprom + flash.......................
need help
now my goal is to buy xp-005
who will help?
carsandkeys (21st April, 2021)
This is the problem that caused all the confusion, your file and the one that I generated with immokiller had the same name. When I unzipped it, it told me if I wanted to replace it. I was working on the vehicle and looking at the pc so I thought your first response with the eeprom file was a quote from my file.
The car still won't start. As I said at the beginning, the car had BSI problems and it would not start. When repairing the BSI, the active immobilizer no longer appears but it still does not start, not even with your files. I have a connection with an ecu motor, so I am going to look at the wiring and injectors, which is not the first time that an injector has shorted and does not allow me to start a Peugeot 307.
I had same problem. Lost 2 days. Finaly in other service ecu changed and car start. I lost one customer.
6841707059 576F526B 57416E5453 596F55 526F6B69424152
Bookmarks