diagun help

[sergej]

X431_SERIES_UPDATE-software Launch for update !
Install this software in your PC,then install file Display.zip with X431_SERIES_UPDATE in your microSD=
restore your GAG.
File Display.zip no unpack! http://just431.com/files/X431_SERIES_UPDATE_75.zip
If your do not help-use only new or old update.
And search good update.

[sergej]

Measure the resistance of the all relay contacts.
Must be 0 ohms!

[sergej]

Test relay smartbox.
Give 12V in smartbox.I use main cable and adapter 220/12 V
from old X431.
On negative contact diode alway 5V.
On positive contact diode 5V-when relay no work and 0,25v when work.
Measure voltage on coil relay=diodes D2-D37.
On all positive contact diode 5V!
In Diagun-OBDII-OBDII SAE J18150 PWM mode.
Only on positive contact diode D34= 0,25V!

[electroniquearts]

Test relay smartbox.
Give 12V in smartbox.I use main cable and adapter 220/12 V
from old X431.
On negative contact diode alway 5V.
On positive contact diode 5V-when relay no work, 0,25v when work.
Measure voltage on coil relay=diodes D2-D37.
On all positive contact diode 5V!
In Diagun-OBDII-OBDII SAE J18150 PWM mode.
Only on positive contact diode D34 0,25V!

here are the result
thank you

[jupiter72]

Hello!

I have got a clone Diagun,and I have got a problem now.
1. I cannot switch off the PDA with taste( I can on switch,I think taste is OK)
2.PDA doesnot see the sd card
3.PDA hasnot voice

Can you help me?

[sergej]

Diagun has a connection to a PC via USB?

[sergej]

You use button "Reset"?

[sergej]

Test your microSD in PC.
On Diagun without microSD.
Connect USB Flash to Diagun via printer cable.

[jupiter72]

I have tried all from you,but not ok :-(

[sergej]

In your Diagun problem with registry or wince5 on flash
memory K9F1G08.
In Diagun no button "Hard Reset".
You can test Hard Reset via delete hive partition.
It's a lottery - or recover all, or you will kill
Go into the Control Panel - memory.
There will be two sections.
Part 01 properties Dismount -> Format -> Mount
First came pictures of their sections.

[sergej]

Dismount -> Format -> Mount" "Part01"

[zimbolodejaz]

hello
can someone tell me how to get the french version for diagun?
i'm french and i have english version and some time it is difficult
thank"s for your help

[miha99]

Simple, select French language in setings and if necessary buy French soft pack for your S/N number.

[sergej]

If you want French language in wince5 -Settings-Control Panel-
Regional Settings-language-French (if allowed ).
Then -Reset button.I do not recommend it-in Diagun a bad memory.
If you want French in diagnostic Settings-French .
In your update file in folder GAG\VEHICLES\DGAUDI\V26.20 must be French GAGLIC.FR AUDI_FR.ggp ,AUDI_OLD_FR.ggp,GAGLIC.FR .This file only for one S/N.
You can in http://just431.com/?nav=programs&device=7
free download Demo with French language and your S/N.

[rafekj]

Connect smartbox in auto, key on- bleu light is on flaching.
In Diagun BT-seting- <-> bleu light shining constantly.
Tap Demo -see N smartbox.
Then tap on you auto.

Hi,
Sergej I did try to use your diagun emulator but this is what i get:

checking smartbox --> soft, s/n ...--> reseting smart box-->DiagnoseMain Err ID: -5

it sounds for me like it is not compatible with new update i have for my.... is there any way to fix it?