diagun help

[jjrp255630]

anyone have dump for nand for Diagun-3?

regards

[dieselengine]

hello, I have the same problem with my lunch diagun "contact your local launch distributor",I have tried loading several different updates to my sd card, always same problem, any help please

[ford2002]

Dragon 3 dump plz

[CHIKO]

hi my friend sergej in the first thank u off all what u do for diagun x431 u are the doctor
i solved my problem in the inter face bleutooth one wire damajed like u said to my freind
when I read your post MicroSDHC in Diagun.
load 6okt.rar whith Registry Workshop diagun dont start desktop
Ihope your help thank u for all

[CHIKO]

any help from somoene

[ElectroRadar]

Hello good day I could pass the folder GAG complete with the marks of the vehicles since I hurt the sd card of my diagun 2 and the GAG ​​they put only brings the DEMO greetings and esporo can help me

[jorgecostacv]

hi may diagun III has batery problem can you help me with the firmware and how can flash it,

thanks,

jorge costa

[jorgecostacv]

Hi, i got a working Diagun III full Bin and i FIx the problem of the boot freeze and the other diagun with the battery problem by reprogramming the k9f1g08u0d. Thanks for nothing to some selfish here money hunters!!!


PS: FREE!!!!!

hi may diagun III has batery problem can you help me with the firmware and how can flash it,

thanks,

jorge costa

[kamionk]

hi all
im have problem with old diagun x431 after connect to bmw x5 end after start engine, brocken k-line not connect with other cars in kline, after Can work ok
what need check? 12v, 5v, 3.3v ok in demo mode its test only have pass (someone knows ?)
iso 9141-2 not work please help

[ElectroRadar]

Good morning to everyone who has the files for Diagun2 s / n 980541827300 that can share them my memory was damaged and I do not have backup of the GAG ​​folder I hope you can help me thanks

[lee123456]

using emulator WINCE 5 when i start my Diagun2 up in demo all seem to work fine. buy when i go into the car brand it say, Dianosemain err id: -5 "please upgrade the display program and try again " anyone know why

lee

[lee123456]

can i take out the bluetooth pcb out of the Diagun2 hand pda and use it with a
USB to TTL UART CH340 Serial Converter

i would like to know as well if so were do the pin marked (pair) go? DTR??

[robertorcada]

please i need your help. i'm installed software diagun in pda Windows Mobile 5.0 hp ipaq, the moduls vehicle 1 y vehicle 2 run in this software, pda bluetooth finds it and connects with the key 1234 but does not communicate with the program the program says that Bluetooth is off or not connected, when I check the pda she detects it but the smartbox does not to the pda, you managed to do tests. sorry for my english but it's not my native language

[yarokas]

Hi
My Diagun 1 sn 9805448 starts but wont see the sd card and wont connect to pc via USB. Maybe someone had same problem and can share solution?
P.S. Sd card is 2gb size, formated as FAT.

[robertorcada]

how to flash my diagun 2, it stayed on the x431 logo, I connect to pc it recognizes usb but it tells me that it has no driver that recognizes the equipment. ActiveSync is installed in xp