seat ibiza tdi, how to swap ecu??

[motocarlos]

hello,
i have a seat ibiza 1.9 tdi 110cv, and the ecu is dead!!
now i have another ecu but cause the immo, it cant start, how can i put this new ecu to run in this car??
with vag com (vcds) can i do it, or it must take it off with immo killer??
and if with immo killer what is the eprom in the ecu? is it the eprom who says b58 maybee a 24c02??

regards.

[gezame]

Hi

B58253-B58258-B58383-B57669-B58293 maybe 24c02.

[gomarota]

you dont need read 24c02 to kill im*o, you can do with obd cable can comander

[gezame]

you dont need read 24c02 to kill im*o, you can do with obd cable can comander

Hi
Sure can commander read 24c02 in OBD?
Regards.

[Autotecno2006]

hi, in this case, just switch the chip from one ecu to the other !

[spookauto]

simple go to ross tech and look for tdi eci... the only thing you have to do is reset the setteings after that the seat will start... if you cant find it pm me

[motocarlos]

problem solved!!!

thanks for all, i have do some search and in rosstech site i have found the solution.
i only go to immobilizer and adaptation canal 0 and read and save, and the car start now.

thanks to all,
best regards.