You have a Dream ,car repair. You dont write Vin , Engine .You think all Peopole to know,what a car you repair ? Think about ,what need car elektriker if he need repair a car.
hi got here in my worshop an 2011 citroen c4. the most of times when start car and engine worm, ther is no acceleration , no power assit and maybe other problems that i did not realize.
when prolem happens i got no communication with bsi either with power management ecu located on the battery.
tried with other bsi , nothing changed,unpluged energy module the same.
any one can shine my road??
regards.
Last edited by gccb; 8th May, 2021 at 07:42 PM.
You have a Dream ,car repair. You dont write Vin , Engine .You think all Peopole to know,what a car you repair ? Think about ,what need car elektriker if he need repair a car.
hello what voltage alternator charging?
Check for water ingress. Or just open the bsi and have a look. You might get lucky
it's citroen c4 from 2011 1.6hdi with edc17c10 ecu.when problem happens only when car is worm, there is no acceleration not respĂ´nding at all ,engie rpm is very low , no power steering, no charging alternator, but sometimes if i leave car ideling for a while all symptoms disapears alternator is charging, steering power on, idle rpm on 820 tr/min and i can accelerate. if shut engine for 1 hour , car is cold and all working good.
i can notice when problem happens ican't communicate with bsi , battery charging module an power distribution module placed upon the battery but if i shut engine i can communicate , the strange thing is all cited moules are connected with lin bus, i tried dsconnecting module after module notthing changes.i tried changing bsi nothing changed. no water ingress.
im stuck.
please help
it looks like you have a communication short-circuit when the modules are heated, maybe you need to disconnect it one by one? dasch board
or battery problem
tried with good battery, same problem.
sure someone here had similar problem on c5/c4 508 ds4 /ds5.
need your help please.
i will have car for second time monday ,i promess customer to fix problem so i will sacrifice all my knowledge and time ,please if some one have any idea iwill be grateful and i promess if i find solution i will share it with you.
other thing in bsi i got B162C 12 as dtc.
regards
There must be a unit called BPGA on top of battery for distribution several branches of battery supply to units. Try making bypass the main branch e.g. jumping across the two big bolts.
Bookmarks