Hi,
Add your file ,we will check.
hello guys I am looking for file with ews off ms43 325i e46 why? I do myself in tunerpro and make a immo bypass but no crank so to be sure I one more time try write file from you guys and see what happens because I think this ecu is dead, If I turn a key I hear a fuel relay.
I think ecu don't have propely ground or something like that anyway like I said I am looking for file with ews off for double check.
I will be very grateful for any help.
regards
Hi,
Add your file ,we will check.
here you are
I already have
Last edited by erkor; 9th May, 2021 at 02:01 PM.
The changes to the file looks good.
The cheksums are correct?
Ews is it removed from the car?
Last edited by erkor; 9th May, 2021 at 01:37 PM.
yep I think this is ecu problem
Try this file >
MS430056_M54B25 EWS off CHK5off.rar
dzejkoff (13th May, 2021)
No crank?
Did you conect 1 and 3 pin on ews plug?
It must crank . Look at pins on ews that you have. 50 (+12v) while cranking on pin from ignition lock
Maybe you got bad ignition lock.
It must crank when ews is bypassed.
Maybe starter or ignition lock is bad.
dzejkoff (13th May, 2021)
Right. Such with removed ecu and bridged wires starter must run.
dzejkoff (13th May, 2021)
Thanks guys for reply already buy ignition cube I check stater and starter is good I open and clean inside after that i put copper grease In some specific location.
Bookmarks