BSI Valeo 95256 CLK ERROR/BAD

[electrones]

Hi friends


I read this BSI many times this time i have one problem using UPA, CLK error or bad is 0,03v
annex pic from connection.. i dont undertand why, i had check all connection all appear normal and connected
Have any other point to connect CLK on this BSI to check
someone hae this before
Thanks

[Dr. Zoidberg]

you need put 2 bridge and read this in 3,3v.

[electrones]

you need put 2 bridge and read this in 3,3v.

Thanks friend

Thanks friend
All this was done but still doesn't work which tool can do this bsi by obd!?
Regards

[adiagnostyka]

ioterminal i think can do. Find manual and check. You can find it on iot site.

[momogsm]

Thanks friend

Thanks friend
All this was done but still doesn't work which tool can do this bsi by obd!?
Regards

Hi

For This Valeo Bsi, It's Easy Via Obd, ( AVDI, X-Tool, Smok, Smelecom, DP4... ) Can Do The Job Via OBD,

But Also, By Eeprom Should Be Easy, I Done A Lot Of Never Had Problem, Follow This Pinout, ( Check Attachment ),

Check Xprog If You Have It, It's Very Good In This BSI

Regards

Als