To @momogsm ,i have 2 question for you, in RET pdf document show prepare blank card with "Transpoder Crypto Key" 16 bit ,but from video in site "lock50.co.uk" he precode blank card with 16 bit PINCODE.
it is steel work card if precode with programmer from "lock50" with pincode?
and second question,in vvdiprog picture is corect pin connection for HFM? or you have other sheme for pinconect to hfm with vvdiprog?
the vvdi prog have the right pinout. (Check if the hfm the same is because you have different versions)
Only if ypu try to read the chip it dont works.
you need go back to select it manual. And the it works fine!
for reading:
reading.JPG
PINOUT
pinout.JPG
Last edited by hollanda; 16th May, 2021 at 09:53 PM.
When I help you
PUSH on +THANKS and REP or
Brat (17th May, 2021)
IF I HELP YOU DO NOT FORGET TO CLICK ON THANKS AND REPUTATION
Brat (17th May, 2021)
just to confirme
made new one and read HFM with vvdi prog but I had to go by MCU-v850-
not by other -hfm-
Brat (17th May, 2021), godfathertwo (17th May, 2021)
Also remember smok does read all hfm by obd the module is not expensive if you already have smok.
same as AVDI
Today I tested on one more 2017 with keyless
Avdi need 15 min to read flash and 18 min to write it after that it display PIN but as You don't have file to save I think it is better to read it with programmer and finish by OBD
btw We progaramme first one that had HFM virgin at dealer in a minute,cost me a coffee to manager
IF I HELP YOU DO NOT FORGET TO CLICK ON THANKS AND REPUTATION
Hello,Can Tango clone prepare card ?
Hello, My vehicle is renault clio 4 2016 model. without inserting the key card into the slot, the car does not start and there is no hands-free equipment. I'm thinking of adding a hands-free feature. I can replace the card reader and card and connect the antennas, but how will the presentation be? Is there anything more specific? can you drive?
You must replace HFM, add antenas (1x above hfm, 2x door handles, 1x under rear bumper) you must also add wiring ( from hfm to antennas), replace non keyless cards with keyless cards(chrome logo).
Before you unmont old HFM you must connect RET and read and save ISK / PIN. Then you install hands free hfm, make it virgin and learn wit original PIN / ISK, then add/replace old cards wit keyless cards.
EDIT: You must also add speaker / horn under front windshield.
Last edited by Mmotul; 19th August, 2023 at 08:32 PM.
Hello, can you help me in more detail? I can install the antennas, change the hfm, but how will I do the programming, what will I use. What programs should I use, if you want, I can pay you for helping me. I really want my car to have keyless entry and start. not everyone said, I even called renault dealers. They refused to help me, I would be very happy if you could help me. I can take and do anything.
http://blog.vvdishop.com/connect-vvd...-hfm-d07f3633/
Can I remove the hfm and program it as in the link?
Bookmarks