Hi, I have 4A42 error con DME, I think something is corrupted on EWS or DME eeprom. I tried to synch EWS-DME with ISTA, do without problems but no crank.
Here are original files.
Hi, I have 4A42 error con DME, I think something is corrupted on EWS or DME eeprom. I tried to synch EWS-DME with ISTA, do without problems but no crank.
Here are original files.
I need help please
Hi friend, i have the same problem
If you have INPA go to DDE and than select CAS-DDE sync menu.
There is an option for reset sync (F1 button ) and store sync code (F2 button ).
You need just the: RESET SYNC CODE EWS-DDE (F1 button)
Then just switch off full ignition for 15 sec and then start car
I also uploaded your ews eeprom as factory reset,so you can try writing this file and syncing again,if no solution works.
If i Helped you,use thanks and rep button to thank me back
write ,make sync ,,use your keys,start car probably.
If there is an issue,you can write back your old file
If i Helped you,use thanks and rep button to thank me back
Stelaras26 (17th May, 2021)
Forgive my friend but I have to correct you
maybe what you did will work
but with my fix it will work better
https://mega.nz/file/xr4SSSZY
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
Ok news on this car. I just see somebody take out EWS fuse on this car, this is already solved. Other thing is with Bram380 files, I see there are no checksum error on DDE ISN, and the ISN is the same on EWS file, so I write those files but still no crank and error 4A42. So I know I´m pretty close to solve this car but still no luck.
What is the next step?
Thanks to all who helped me.
Bookmarks