Digimaster 2 memory chips

[Polos]

Hi guys,

I would really appreciate some help on how to locate and recognize cluster memory chips in general, needed to work with Digimaster 2.
Thank you.

[dm2]

Hi guys,

I would really appreciate some help on how to locate and recognize cluster memory chips in general, needed to work with Digimaster 2.
Thank you.

hello polos
do you find help? i need it to! cant find out how to do bmw x5..
i want to know if i can do with the digimaster ii the e39 bmw x5 2002?
and how do i do that with the digi? do i need to replace the eeprom? or can i use same one?

[immyrs200]

The chip is a soic 35080. This does not need changing.. you need to solder on the back of the dash... Will upload a pic for you when i find it...

[dm2]

hello
i want to know if i can do with the digimaster ii the e39 bmw x5 2002?
and how do i do that with the digi?
when i connect the wiries it is only let me to go up! not to write lower... what i need to do?

[immyrs200]

You have mail....

[dm2]

hello frend

i took the cluster off and on the stiker it is sw21!
i need to know how to do this cluster with the digimaster 2..
why i can only up? it is not leting me to go down..

You have mail....

[carsolution]

Hi friend.
DigimasterII shoes to you all the photo you need to see to know what to do.
If you are not able to ajust for the value you need, send me dump and I will correct it for you.
Please, let me know if it uses the 35080V6 or the normal one.
Best Regards,
Nuno

[dm2]

ok i did try to do it the normal way yesturday..
now the cluster show 999999!
i try to roll it foword with the diagnose mode, but its not going to 0!
what to do now? maybe if i will do the ews and the lcm it will correct it aotomatic?
remember it is hw25 sw21
said somthing ,diag 09?
thanks

Hi friend.
DigimasterII shoes to you all the photo you need to see to know what to do.
If you are not able to ajust for the value you need, send me dump and I will correct it for you.
Please, let me know if it uses the 35080V6 or the normal one.
Best Regards,
Nuno

[r6eck]

do a search the info is on this forum,if you have a 35080v6 chip you need to replace it,buy 35080v3 this will allow you to put mileage lower

[vuno01]

I did a 2003 x5 and didnt replace the 35080
Just solded 5 or 6 wires to the back of the dash and editthe value i
wanted and job done