Read by AUD . IT is sh7055 or 7058.
Write by pins.
You can read AUD by piassini or k-tag.
Read by AUD . IT is sh7055 or 7058.
Write by pins.
You can read AUD by piassini or k-tag.
OK
and for writing also piasini or k-tag ?
what are connections ?
thanks
pinot mt07.jpg
HERE IS AUD LOCATION for read by piassini or K-tag. They have other pinouts for read. If You have programers You should have instruction how to connect into AUD.
Pavel-DN (20th January, 2024)
and pinouts for writing ?
Is also possible to write it with a ftdi cable usb ?
Yes. Possible to write by ftdi cable. GND ,+12V ,tx ,tx ,fwe
Could share with me bin file from this ecu?
yes I can share with you, as soon as I read file. You could help me to read the file.
I ordered a ktag; it should arrive me next week.
What fdti cable can I use for write this ecu and what is fwe pin ?
FWE is flash voltage 5V
For ftdi You need some software . Like Mcu innovation .
U need also checksum. But Ktag can calculate for u checksum.
I will help u to read this file when u get programer.
where can I download a software as mcu innovation ?
but do you have xdf file for this ecu ?
U need buy it. On this software web side.
I make myself xdf for bikes some times I buy.
For this model don`t have but should be possible to buy for 80 euro.
So also does ftecu.com use a ftdi cable for write ecu ? FTDL9.jpg
and what are pinouts ?
hey
I have now ktag 7.020 with ksuite 2.25. I have upgraded protocols lauching first ksuite 2.70 and then ksuite 2.80. How can I write to BW3-8591A ? I dont' see it on Ksuite
Please help me
Thanks
hey
I have now ktag 7.020 with ksuite 2.25. I have upgraded protocols lauching first ksuite 2.70 and then ksuite 2.80. How can I write to BW3-8591A ? I dont' see it on Ksuite
Please help me
Thanks
Do you read it ?
You can try read and write it as mt09 they use same procesor and same protocol for write.
Last edited by t7sebaa; 15th July, 2021 at 08:03 PM.
Bookmarks