hadaria001 (19th June, 2021)
Hi. could someone disable immo for me from these two ECUs? I have a problem in my car and would like to rule out immo
https://en.files.fm/u/uvhychz82
I'm sending the link because I have a problem with attaching it here
Last edited by importlive; 18th June, 2021 at 07:55 AM.
hadaria001 (19th June, 2021)
which ecus ? more info, attach eeproms..
up
I'm sending the link because I have a problem with attaching it here
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
importlive (18th June, 2021)
one file already off, other is immo on, attached immo off both files, if "mariusz" still not work, try change eeprom with new one. pass in pm
importlive (18th June, 2021)
In which immo was well turned off?
Thank you very much, I will check and let you know.
The patient is a4 b6 2.5 TD and I have a problem after replacing the pump, but I'm afraid that the pump is damaged
I have a request . Can you put it on an external server ?? I also have a problem with downloading, I do not know what is happening today.
not at pc now, mariusz file was turned off good.
With pump change you have 2 possible solutions:
1.) Take PIN from kiszka und learn pump to immo with VCDS -> http://wiki.ross-tech.com/wiki/index..._Pump_Swapping
or
2.) Immo off on pump change only both files -> EEPROM & Flash! Only EEP will not work..
CMD | Alientech K-Tag | Batronix
+++ NO Passwords +++
Just press THX & Rep if i helped you....
baygrozdan (19th June, 2021)
Thank you very much !! Unfortunately, the file 20210502_112042_EEPROM_2404 my is not working. The car starts and goes out and the errors are 17978 - P1570 .... The engine controller is blocked by the immobilizer
anybody help ??
Bookmarks