This my interface
Inviato dal mio SM-A307FN utilizzando Tapatalk
Good morning
I have this opcpm which never worked. reading on the forum I see that it can be repaired.
Initially with recognized the interface, it gave me the error. Hardware not connected to the car.
Then through OCFLASH I loaded the firmware 1.39. The interface is now recognized. The hardware test says passed successfully.
When I try to make a diagnosis it cannot communicate with the ECU. He makes several attempts and then fails. This ecu does not communicate.
I have tried different versions of software, both opcom and vaux-com, but still the same error. Is there any way to fix it?
This my interface
Inviato dal mio SM-A307FN utilizzando Tapatalk
Just buy a new one with a real PIC 18F458.
Last edited by Mario6; 14th July, 2021 at 08:00 PM.
can you confirm that this is a micro fake? i am afraid to buy another fake. In the title of this opcom, it says it's a real pic18f458
Inviato dal mio SM-A307FN utilizzando Tapatalk
Hi.
I have Opcom from the first link "Opcom New" works with Fantomels SW. Second from AutoKcan is Opcom V5, you can convert it to work with CHCAN line.
quindi non puoi farlo funzionare che ho? Non volevo comprarne un altro. anche perché me l'hanno venduto con pic18f458 originale
gia (19th July, 2021)
Last edited by paulthejoker; 22nd July, 2021 at 08:40 PM.
Hi.
Everything looks like a good "Opcom New" without the D5 and C22 but the PIC is not 18F458. Depending on what the seller put in the product description: he is honest or he forgot to polish the original text on the PIC.
I think it's better to buy a second one with a real PIC than to rewrite and program. But that's just my opinion.
I already have another one ... clone with pic18f ... everything works on opel meriva B year 2011 except the mesauring block (I'm trying to find the solution) and I wanted to repair this too to take advantage of all 2
What Opcom software are you using?
Try one of the SW from Fantomel.
I use opcom 1.59 with software 12309a + 131223d given by the seller but on opel meriva B year 2011 ... it works but it does not work mesauring blocks and programming .. I try the fantomel files and I hope to solve ... I do not want to modify opcom to revision C
My opcom flew out the window .... rova a volare: .....
My opcom was fake too
Bookmarks