Satlink ST-5150 Firmware , Dbtool , Db Europe and America .

[salchicho2000]

Hello everyone , I make my little contribution.

Theses files is for SatLink 5150.

Satellite database Europe and America , C band are incomplete and some American satellites are also , but it is enought you guide. ( As i am Spanish , database starts in Astra 19,2 , sorry )
https://mega.nz/file/mSImEJQL#UWayEo...X6eErLl21Id_Ps

Firmware version 2.8 ( If you already have it , it is not necessary to reinstall .
https://mega.nz/file/fHxUgIoC#q_3P9u...8oc1hcqCsC14XU


tool to edit satellites , you can edit the order of them and add more , but remember that Satlink 5150 is limited to 107 satllites ( You will not be able to add transponder , because they cannot be safe ) REUPLOAD, thx
https://mega.nz/file/ueBwHBjI#iIlrLB...Dn697D2F4nbwYc

Thank you very much an enjoy it .

*I am not responsible for any damage it may cause.

[gaga24]

Is any one having problems with DB tool provided in link above? I did register it, but i cannot opet userdb file also provided. This is no good.

[sergiy1103]

Firmware version 3.2 for ST5150_S2_T2_C_Satlink_V3.2_English_220730(Eroupe_ 30w_75e_220526) for the hardware version of the device ABC-GB0-A-0
https://dropmefiles.com.ua/en/RsW4aQVMk3

[800A]

Hallo, have same problem. Don´t work. Can not open bin file

[800A]

Firmware version 3.2 for ST5150_S2_T2_C_Satlink_V3.2_English_220730(Eroupe_ 30w_75e_220526) for the hardware version of the device ABC-GB0-A-0
https://dropmefiles.com.ua/en/RsW4aQVMk3

Hallo,
unfortunately link is not working. Can you reload it ? Thank you. Do you have an channeleditor that works ?

[Tobias Claren]

Hello.


Is there still a copy of firmware 3.2 for ST5150?
I can only find the firmware for the possibly identical Summit Digital SCT-845, but if there is a version for the SatLink ST5050, I don't want to experiment with other firmware.


And is there any other editor that accepts the bin file?
Is the non-functionality of "SatEditor" due to operating systems that are too new (Windows 10 and 11)?


EDIT:
I found a download here:
https://satsis.info/forum/pribor-dly...mbo_02-01-2021
I downloaded it and made a zip out of the 7z to upload it here.


Is it possible to check the authenticity?

And does anyone know the editor that can be seen there as a screenshot?

[rosaolivares]

Hello.


Is there still a copy of firmware 3.2 for ST5150?
I can only find the firmware for the possibly identical Summit Digital SCT-845, but if there is a version for the SatLink ST5050, I don't want to experiment with other firmware.


And is there any other editor that accepts the bin file?
Is the non-functionality of "SatEditor" due to operating systems that are too new (Windows 10 and 11)?


EDIT:
I found a download here:
https://satsis.info/forum/pribor-dly...mbo_02-01-2021
I downloaded it and made a zip out of the 7z to upload it here.


Is it possible to check the authenticity?

And does anyone know the editor that can be seen there as a screenshot?

Does the download still work? Thanks for everything