P0483 check small blue wire under airbox, maybe it broke, it common
Screenshot (3).jpg
Hi
The came from other garage all dead no start , because the send me the dash to repair
I have good signal to ecu from pedal
I see in live data 0 to 90% and voltage , but no good data of the pedal to dashboard always 2% to 3% and the 2 wires that must care 5v have 12v
GND is solid to , all wires to dash have 0 ohms .
All dash joint"s solder , in Dash I have dtc 1750 in ECU P193B and P0483, I have adapted one Used ECU
And IDS say that I have to make update the 8m51.-12A650-XC to 8m51.-12A650-XE , so I flash and make the config .
IDS can"t get good communication to ACM , send some U codes , like U0140 U0166 and U0238
Any ideia ?
Thank"s in advance
My work is my life ART TECH GARAGE
P0483 check small blue wire under airbox, maybe it broke, it common
Screenshot (3).jpg
mexanico1971 (25th August, 2021)
Hi
The P0483 was the engine fan module
I disable p193b in ecu
Now only got
P2458 = dpf
And one in dash C1750-60
Pedal to dash.
Today I take out the dash again to inspect ,that pin is pin number 1 , that are you point ?
That goes the the red mark on the other side , as I remember it came from pedal
Any tips are welcome
Thank"s
Brs
Enviado do meu SM-J530F através do Tapatalk
Last edited by mexanico1971; 26th August, 2021 at 12:46 AM.
My work is my life ART TECH GARAGE
Solved
track in dash PCB under plug connector damage , and new engine fan module
thank"s
take care
My work is my life ART TECH GARAGE
Dunker (1st October, 2021)
Bookmarks