Hi try and report
Pass in PM
If I helped, please use reputation+thanks button
Hi try and report
Pass in PM
If I helped, please use reputation+thanks button
fuzz1 (21st September, 2021)
Hi
I just tested it in the car and unfortunately having issues.
There is one fault U3000:49-D0 CMDTCs control module.
Any idea what could be causing that problem? Is there any way to solve this fault?
Thanks
Need to replace the BOSCH or Atmel Driver.
Photo of unit board please
Last edited by svenin53; 27th September, 2021 at 07:12 PM.
Please dear members push the button if my work was helpfull!
KESS 3, IProg, X-Tool, CG-100, GCPT, etc.
VAG-Com, KTS-530, Autel MaxiDas, Lexia and many other diagnostic tool's.
fuzz1 (27th September, 2021)
CPT_Mazda.jpg
Hi
Here it is
Check drivers on board, look closely with microscope and check, any time burn a little hole in driver and this need to change.
Regards))
Last edited by svenin53; 27th September, 2021 at 07:13 PM.
Please dear members push the button if my work was helpfull!
KESS 3, IProg, X-Tool, CG-100, GCPT, etc.
VAG-Com, KTS-530, Autel MaxiDas, Lexia and many other diagnostic tool's.
fuzz1 (27th September, 2021)
I did not find any burn marks on the drivers.
I will look again. I guess if ever it's burnt it would require a driver which would be difficult to find and probably require a new board.
Anyone can possibly try to clear the original file again? maybe it was not cleared properly. the error U3000:49 was not present when i first scan the car before i worked on it.
If no one help you, i tried it tomorrow
Please dear members push the button if my work was helpfull!
KESS 3, IProg, X-Tool, CG-100, GCPT, etc.
VAG-Com, KTS-530, Autel MaxiDas, Lexia and many other diagnostic tool's.
fuzz1 (27th September, 2021)
Hi!
Can anyone please check the cleared files? It's giving U3000:49 fault.
Could it be something wrong with the dump?
Thanks
Here you file
Please dear members push the button if my work was helpfull!
KESS 3, IProg, X-Tool, CG-100, GCPT, etc.
VAG-Com, KTS-530, Autel MaxiDas, Lexia and many other diagnostic tool's.
fuzz1 (28th September, 2021)
please could smbdy clear crah data?
thanx wery much...
i want to test smthing in the car.... thanx....
Bookmarks